3D Printed Annealeez Wheels for 375 CheyTac

[Yerman]

PM me your email address if you want the file.

Don't mind the color. It's what my buddy had and I don't care.

The red stuff is High Temp Red RTV for traction available here https://www.amazon.com/Permatex-811...+high+temp&qid=1593189979&s=automotive&sr=1-1

 

[howe0001]

Hi, what material is used in the 3d printer for these?

 

[Banango]

Im extremely surprised that doesnt melt but what material did you use? Also pmd for the file

 

[DairyDictator]

That's gotta be ABS or something similar. No way PLA would hold up and I have my doubts about PETG as well.

 

[Yerman]

They were printed on an SLA printer with a resin but I'm not sure which kind. I have a text into my buddy that printed them so I can find out.

However, when set correctly, there is very little heat that is transferring down the case and onto the wheel, especially something long like a CheyTac case. I am pretty sure a filament printer would work just fine.Perhaps you guys can try it and report back?

@Banango , I'll send over the file shortly.

 

[Yerman]

Here is the resin...

E1 Model Light DLP | shop.benco.com

shop.benco.com