40x trigger?
- Thread starter Ruslow
- Start date
Do you have a
40x ,,,,one tension adjustment screw in front of the trigger with the ball on top of the pointed screw
or 40xb trigger , tension adjustment screw in front of the trigger and another in the trigger , easier to adjust and can adjust lower usually
I have changed out the springs in both and lowered the trigger pull substantially and safely
You can buy spring kits
40x ,,,,one tension adjustment screw in front of the trigger with the ball on top of the pointed screw
or 40xb trigger , tension adjustment screw in front of the trigger and another in the trigger , easier to adjust and can adjust lower usually
I have changed out the springs in both and lowered the trigger pull substantially and safely
You can buy spring kits
Stan, I believe I have a couple triggers left over from my 40X days. I won’t be able to look for them for about a week, but will reach out when I do.
MB
where are the kits avail. I will say this those. I can adjust screws and feel pretty safe about that. but to start changing springs and risk the safty of myself as well as other at the range. i will think long on that. AS for MB I appreciate the offer but it does have a 40x in it screw is infront of the trigger. .Just would prefer to replace and set this aside for something else. I also have a 40xb that i think has the wrong trigger in it. thanks Stan
