I'm working up to 1760 yds. I've been shooting/reloading 6.5 for 5 years now, all on the RAP (poors yippie). I'm wondering which brass to use for the shot at a mile. I have a set of Starline 1X fired Lg primer and a set of NEW Starline Sm Primer on the way now. I would try others like pedersen or lapua if they were in stock.
If Sm Primer is better for high vel, should I fireform the brass with some other bullets first then load the flatlines? My normal brass process is: anneal with AMP, hot wash, dry, deprime, bump 2 thou, bushing neck size, then load. I have RL16, H4350, and Staball to use. Also have some 140 Barnes MBs I can use as well. I have the MOA to rainbow them in if needed.
thx!
If Sm Primer is better for high vel, should I fireform the brass with some other bullets first then load the flatlines? My normal brass process is: anneal with AMP, hot wash, dry, deprime, bump 2 thou, bushing neck size, then load. I have RL16, H4350, and Staball to use. Also have some 140 Barnes MBs I can use as well. I have the MOA to rainbow them in if needed.
thx!