6 creedmoor bolt gun loads

[cropins]

I am looking for load recommendations for a 6 creedmoor bolt gun. Powder, bullet, length etc.

 

[Mike]

105 Bergers
H4350 40-42+ grains
whatever primer
Length between 2.78-2.83

 

[cropins]

Mike, are you running Hybrids Or VLD Bergers?

 

[FCS]

Hybrid

2.78 would be good starting point.

 

[mkollman74]

105 Bergers
H4350 40-42+ grains
whatever primer
Length between 2.78-2.83

I am assuming Berger Hybrids??

 

[JGorski]

I got my 105 Hornady HPBTs set at 2.695-2.700" oal, 2.208 to the ogive, waiting to test the loads in May when the range opens up, Ill be testing 41-43grs RE17, I use CCIBR primers and Hornady brass. I seated some VLD & Hybrids to an ogive length of 2.220", Nosler 105s to 2.233". The Hornadys are meplat trimmed, btw. And the rifle is throated for them.

 

[Mike]

I am assuming Berger Hybrids??

Yes, I was referring to the Berger Hybrids

 

[cropins]

Maybe I just need to lengthen them out, I have been running 2.175 to the ogive with the hybrids and overall lenght is 2.77, and 43g of H4350.

 

[cropins]

I forgot to ask what about trim length for the brass?

 

[JGorski]

I forgot to ask what about trim length for the brass?

1.917" is what I trim mine to.

 

[JGorski]

Maybe I just need to lengthen them out, I have been running 2.175 to the ogive with the hybrids and overall lenght is 2.77, and 43g of H4350.

What is your rifle throated for? If you have the same throat as me, which is what GAP uses your about .060" from the lands.