Looks like a LGS, I meant your ammo stash.LOL!! mother hubbard is bare!! husky will attest I just have a fancy AI paperweight.
Not 300NM but 300WM. I backed them down to 3260fps where they were more consistent, loaded up a bunch for a rainy day...
Hey Burt, you think these would work on those Ass Blasters? Maybe one of the Shriekers?
my ammo stash is nothing to brag about 1,000 round of 6.5 brass that needs prep. I need to quit being so lazy and reload a ton of 6.5cm. I've just been way too busy this last year with work, I do however seem to have an endless supply of 9mm in a purple crown royal bag that I just can't seem to find the bottom of.
my stock 300NM barrel really likes the berger 230 factory loads. give the 230s a try. 215s shot just about as well
Had the boy shooting the AI positionally today for a little bit. Had the 16.5” 308 barrel on. He is shooting his first centerfire match next month at Altus. It will be a guardian match. And he is 11yrs old.
Attachments
Can’t wait for mine to be old enough ^
today was the day of the step ladder. Shoulda got some pics of the dog house lol
group from doghouse:
today was the day of the step ladder. Shoulda got some pics of the dog house lol
group from doghouse:
Last edited:
AXMC got new glass Thursday! Shout out to Richard @CSTactical, great customer service and the scope showed up 2 months early!
Camo was easy, bought a tigerstripe silicone sheet stencil, hard part was talking myself into rattle canning a multi thousand dollar rifle,lol, at least now during hunting season the rifle will not stand out like a sore thumb.
I am very impressed with the TT, optical quality is out of this world and the eyebox is very generous, really easy to get behind and get a full view. Turret clicks are VERY positive and the toolless zero is great.
Now you just need to spray paint that $4500 TT to match....
Gonna let the "New" wear off first...lolNow you just need to spray paint that $4500 TT to match....
Its the MOA-XR, which as i understand it, is the only MOA calibrated reticle they offer at this point. Very fine markers, can measure down to .1 MOA with it. I will never shoot good enough to utilize that.
Already am, put 50 338LM,50 308 and 50 6.5CM through it Saturday afternoon.You're very welcome! Enjoy your new setup
Said goodbye to the AT and upgraded to the AX this past weekend. Had to have it in sage green!
You need a sage green Spuhr for that bad boy... And guess who happens to have one for ya...
Haha
Haha
And just like that he received 115 pm’s regarding selling the AT and another 1,546 pm’s on just selling the folding thumb hole stockSaid goodbye to the AT and upgraded to the AX this past weekend. Had to have it in sage green!
Shoot, I just picked up the black spuhr for the AX... That is quite the temptation, though. PM inbound
And just like that he received 115 pm’s regarding selling the AT and another 1,546 pm’s on just selling the folding thumb hole stock
No doubt! Fortunately the AT went to a good buddy in our shooting crew, thumbhole stock included... haha
The clothes are Kuiu 'Verde' camo that is really very dark but works well in winter months.
The bino harness and front support bag are A-Tacs iX which is by far more suitable most of the year.
samb300
GCP Rifle Co. Accuracy Obsession Vision Products
Supporter
Commercial Supporter
Full Member
Minuteman
samb300
GCP Rifle Co. Accuracy Obsession Vision Products
Supporter
Commercial Supporter
Full Member
Minuteman
Yes, the Vision Products is making the AI chassis and it's being distributed and sold in the US by GCP Rifle Co in Florida
So as a baby AXMC owner, I am having trouble figuring out whats going on here:
Accuracy International AI-6867: AXMC .300 Win Mag Doublestack (12 Round): $98.21
vs
Accuracy International AI-26091BL: AX/AXMC .300 Win Mag Doublestack (10 Round): $152.89
I actually have two questions on this. First, why on earth is a 10 round mag 50% more than a 12 round mag?
And second, does the "AX/AXMC" designation in the 10 round model mean that AX Long Action and AXMC magazines are interchangeable?
Accuracy International AI-6867: AXMC .300 Win Mag Doublestack (12 Round): $98.21
vs
Accuracy International AI-26091BL: AX/AXMC .300 Win Mag Doublestack (10 Round): $152.89
I actually have two questions on this. First, why on earth is a 10 round mag 50% more than a 12 round mag?
And second, does the "AX/AXMC" designation in the 10 round model mean that AX Long Action and AXMC magazines are interchangeable?
One is for the early models (mine is 2013 and uses the $98 in my AXMC)
Other is for newer models
samb300
GCP Rifle Co. Accuracy Obsession Vision Products
Supporter
Commercial Supporter
Full Member
Minuteman
Nice!
I'm assuming from your statement in the "official" announcement of the Vision/AO chassis today , " External weights compatible with all Vision chassis', as well as all other M-Lok chassis such as MDT ACC" that these will work with a Gen 1 AO chassis?
Thanks
samb300
GCP Rifle Co. Accuracy Obsession Vision Products
Supporter
Commercial Supporter
Full Member
Minuteman
Axsr 308 bolt body is back in the stock at milehighshooting. Just heads up.
EuroOptic has mine in stock as well and shipping out to me today. I thought it was going to be a complete assembly including the firing pin/housing... it's just the bolt. I don't see a complete assembly for an AXSR, so... I'll have to use the shroud and firing pin assembly from the 300 WM or 338 NM bolt I already have.
Went out last night to try my newest acquisition with my Amigos!. the vudoo 360 in the AI chassis suppressed is a riot.
I know it's technically half AI, but there's two other AI's present so it counts @Huskydriver !!! lol btw thanks @Krob95
** I need a higher power scope to see those tiny ragged holes the 318i isn't cutting it.
I know it's technically half AI, but there's two other AI's present so it counts @Huskydriver !!! lol btw thanks @Krob95
** I need a higher power scope to see those tiny ragged holes the 318i isn't cutting it.
