Ah, I didn’t read your post correctly… I agree, a LA ATX AICS would be
My unicorn rifle is a mid length AXSR action in an updated ATX chassis to shoot 7PRC.
Have not posted in a bit, same old rattle can MC, Got bored and went to the shop to play Mr. potato head with the MC today. Made a ELR specific forearm with bridge to mount the prism, lol, Just have to figure out what color to spray paint it, hopefully Walmart has it in stock 
MC/SR's are so versatile.
MC/SR's are so versatile.
The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.
The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.
What's old is new again.
The range I go to is currently in the straight contour 32" barrel shooting the least recoiling round phase.The locals are now on heavy and slow 6.5 so they can "see" the bullet and it's trace.
Meh, free recoil, fast 6's, that's so 2023. All the guys that have been making fun of 6.5 'manbun' will soon be singing it's praises again, and saying the 6 shooters are ghey.
Losers. Just shoot 308.
#MidPacTacHero
#MidPacTacHero
When in reality….Meh, free recoil, fast 6's, that's so 2023. All the guys that have been making fun of 6.5 'manbun' will soon be singing it's praises again, and saying the 6 shooters are ghey.
They’re both ghey…
Damn... savage. You aren't wrong, but if I have to shoot a dinky ass short action cartridge it'll be the 6.5 creedmoor .. I reserve my .308 bullets for a real cartridge.like the 300 Norma.
I’ll see your ridiculous amount of powder consumption and premature throat wear and raise you the time of flight of a wounded homing pigeonDamn... savage. You aren't wrong, but if I have to shoot a dinky ass short action cartridge it'll be the 6.5 creedmoor .. I reserve my .308 bullets for a real cartridge.like the 300 Norma.
#308forlife
#308masterrace
You never cease to amaze me!Have not posted in a bit, same old rattle can MC, Got bored and went to the shop to play Mr. potato head with the MC today. Made a ELR specific forearm with bridge to mount the prism, lol, Just have to figure out what color to spray paint it, hopefully Walmart has it in stock
View attachment 8340182View attachment 8340183View attachment 8340186View attachment 8340187
Attachments
No way is that a 308 projectile, way to sleek and it would have a bc much better than 1.2 G7 or whatever your 308 is rocking. Here's a more accurate picture of a 308 in flight:
You:
Ranging the target just to have the info transfer to your kestrel, then Bluetooth to your phone, spit out .2 MIlL on your fancy watch just to make a 200 yard shot on a 4 moa gong
Vs
Me:
5 stages behind still trying to use my reticle to range the target like it’s 2002 only to lob a projectile with the ballistic coefficient of a wheelbarrow 8 feet to the right
Wow we don't see anything like this in the Barrett MRAD thread , thank god....... Does AI include poppers when you buy a rifle ?
I've seen a few of you MRAD owners....
And yes.......you get poppers and a brisket sandwich.
My wife asks me weekly why I have pictures like this saved on our computer....
Wheres the pic of the dumpster full of mrad frames that had to be destroyed due to them cracking ? Asking for a friend
Thing is the easy button. Point click dead
Thing is the easy button. Point click dead
Hey any manufacturer can get a bad lot of material. The question is how do they handle it.
More stable , better for accuracy etc. Takes longer to deploy. Less versatile you can’t slide it back closer to you. Takes longer to remove
Tbac is quick , stable enough ,
I like the elite a lot for steadiness / long small shots but the reason I finally got a arca mount to put on my AI is for sideways rooftops at matches. I had cyke bit they are junk sold them. There was a rooftop ^ you shoot left side then right side at MKM. kicked my ass with the tbac. Lol. The elite swivels all the way so will be perfect if I ever have time to shoot matches /practice
I like them enough that 1 has a permanent hone on my AWM
Last edited:
Ahh here we see MRAD in their native habitat
The scrap bin
The scrap bin
Cracking are you serious, they had to be cut with a torch . Put a torch to the AI and the plastic and glue melts that holds it together.
MRAD owners are a unique bunch for sure.
I love comparing caliber conversion times in the field, RTZ accuracy, and overall accuracy with them. Barrel availability is also quite amusing
I love comparing caliber conversion times in the field, RTZ accuracy, and overall accuracy with them. Barrel availability is also quite amusing
The elite iron works until the mount starts to flex and bend and the ring starts to contact the barrel....
The correct term I believe you are looking for is , Remington 700 in a aics chassis ... Not awm
Aw dang! I did not know that about the EI. Shit I was planning on pulling the trigger on one. Thanks for that..The elite iron works until the mount starts to flex and bend and the ring starts to contact the barrel....
The correct term I believe you are looking for is , Remington 700 in a aics chassis ... Not awm
Shot with a guy at the NF elr challenge last year who's ei had to be bent back every stage because it was bending and contracting the barrel... @Mr. F did you ever get that one fixed?
Yeah I'll have to withhold judgement on this one till Mr. F checks in.. I've got an an EI and at its thinnest the mount steel is .12". Not saying it can't happen, but it had to be an excessive amount of force applied somewhere. I'd think the forend on the AXSR would pop first.
He keeps tryna sneak that thing in here lolThe elite iron works until the mount starts to flex and bend and the ring starts to contact the barrel....
The correct term I believe you are looking for is , Remington 700 in a aics chassis ... Not awm
I have used my EI for years with no flex or failure of any kind. It works as well today as it did when new.The elite iron works until the mount starts to flex and bend and the ring starts to contact the barrel....
The correct term I believe you are looking for is , Remington 700 in a aics chassis ... Not awm
Did you buy the lightweight or panning model or the regular one? How you can get it to flex is beyond me.
Bought an MDA Ckye Pod recently and I am also pretty impressed with that one.
Ok.
If using the elite spigot on a AWM.
With minimum offset
And a PILE of abuse.
You might be able to bend it
But you ain’t bending the quick detach one like on my ATX
No f ing way. Bedsides it would hit the top of handguard abs stop before hitting barrel
If using the elite spigot on a AWM.
With minimum offset
And a PILE of abuse.
You might be able to bend it
But you ain’t bending the quick detach one like on my ATX
No f ing way. Bedsides it would hit the top of handguard abs stop before hitting barrel
It wasn't mine it was @Mr. F 's however I did inspect it and it was bending and flexing from the steel that came from the mount to the ring. I also shot it and watched it move poi when the ring came in contact with the barrel
Only way to tell is to pin gauge the fp hole on the bolt or it you have another SFP see how much clearance there is around the tip when it's protruded
Looks large to me eyeballing it tho
Looks large. But check. What year rifle?
Guessing a 14 or 15. Your numbers about 600 later than my 2014 AT which is large
