I really need to get my Vudoo out. It’s going to have a birthday in my safe coming up…
Haven’t even fired it yet
I really need to get my Vudoo out. It’s going to have a birthday in my safe coming up…
Second Q:
Anyone have pics of a 1.5” scope mount on an AT/AE/AW on the low rail? Preferably a Spuhr 4002, but I’ll take whatever.
I’m asking that b/c I’m not sure if I’d go with a clip-on or just a thermal scope. If I go the latter I just want a visual.
Yeah, just a side shot without the NV would work. Just seeing how high they look with that low rail. I like high rings (1.5” to 1.4”) but looks factor into it a bit more than usual as, well, it’s an AI.AI AE Mk I, 20 MOA low rail, 20 MOA IMUNS, PST Gen II 5-25x50, Vortex extra high(1.54") rings, PVS-27. Not the best pic, but I could mock up a living room pick if you need it.
View attachment 8342957
Heres a High action rail with 1.5" height spuhr.Yeah, just a side shot without the NV would work. Just seeing how high they look with that low rail. I like high rings (1.5” to 1.4”) but looks factor into it a bit more than usual as, well, it’s an AI.
Ok, two question:
The first is a pretty obvious question, but wanted to confirm.
AT wanting to run a clip-on needs:
I assume 1.5” because that’s what other rifles need for NV/thermals, but just wanted to check.
- AT Night Vision Bracket
- 20 MOA Night Vision Rail for the AT NV Bracket
- High AI pic rail for scope
- And here is the question: 1.5” rings, right?
Second Q:
Anyone have pics of a 1.5” scope mount on an AT/AE/AW on the low rail? Preferably a Spuhr 4002, but I’ll take whatever.
I’m asking that b/c I’m not sure if I’d go with a clip-on or just a thermal scope. If I go the latter I just want a visual of how high the scope looks.
Heres a High action rail with 1.5" height spuhr.
1.5 with low rail.You still got that at ?
1.5 with low rail.
What’s the difference between that and the high rail. If using a superior 1.3 centerline clip on ?You won't be on the Nvg same plane.....
Kick ass! That’s a perfect pic. That height on a low rail looks good.1.5 with low rail.
I know, but if I go that way I’ll just attach the high rail and NV mount.You won't be on the Nvg same plane.....
Did you do the chest high drop test yet? You can’t say you get it til you’ve done the chest high drop test.My green AT in 308 with a 24” barrel arrived today.
All I can say is, “Now I get it.”
-Stan
Since the AT was built as a sniper weapon system, and not a PRS rifle, I judged it on its own merits.Did you struggle to cycle the bolt like all the PRSers like to complain about?
Not on my to do list.Did you do the chest high drop test yet? You can’t say you get it til you’ve done the chest high drop test.
This is the AT with a Spuhr 4002C with high action rail. This is what Eurooptoc told me what I need for be planar with NV clip on. The 20 Moa rail is still on back order. View attachment 8343816
Holy crap, another LH AI in the wild, in an aftermarket chassis to bootFinally got permission from the atf to take home my supressor
Yeah the chassis is fantastic. Perfectly happy with this and the thumbhole over an atx. Kudos to the guy who came up with itHoly crap, another LH AI in the wild, in an aftermarket chassis to boot
What’s the difference between that and the high rail. If using a superior 1.3 centerline clip on ?
Yeah the chassis is fantastic. Perfectly happy with this and the thumbhole over an atx. Kudos to the guy who came up with it
Back when AI’s were true to their rootsFirst time out with the OG green-on-green-on-green AIAW (for me anyway). Not bad for a nearly 30 year old rifle with a fixed 6X scope! @AndyK
View attachment 8344688View attachment 8344689View attachment 8344700
Preach!!!Back when AI’s were true to their roots
Square
Green
Bonded
!!!!
You bought another ATx???^ like my awm
On a modern note.
View attachment 8344727
Hit me up if ya need a 6br barrel
Also
View attachment 8344729View attachment 8344731
#boltliftsoheavyyouneed4weightstoholdit
It had to be.
Turns out AI won't swap a bolt head, they want to just replace the whole bolt body (for $800 +). Looks like I also have a large firing pin despite the ad saying it was sfp.Meh just swap the bolt head hit up mh no need to rework that
Not sure what thread but a member asked about LRI about making bolts.Turns out AI won't swap a bolt head, they want to just replace the whole bolt body (for $800 +). Looks like I also have a large firing pin despite the ad saying it was sfp.
I'm not overly upset given how little I paid for the rifle, but at this point I'm thinking I'll just have LRI clean up and bush the bolt, even if it won't be pretty.
What can is on the AXSR? Looks like a 338 Ultra SR, but for some reason looks longer…
Just the angleWhat can is on the AXSR? Looks like a 338 Ultra SR, but for some reason looks longer…
It’s the optical inch…must’ve manscaped…Just the angle
Nice rig. I know the owner. What’s up Austin?
There he is! Thanks for letting me play with the AW!Nice rig. I know the owner. What’s up Austin?
-Al
Which reticle on the S&B?
P4LFWhich reticle on the S&B?
-Stan