I’m gonna have to live vicariously through you until I can get a replacement
I’ve been saying the same thing for years. Maybe someone will offer me a salty post 14 AX with the 13” hand guard for my PVS 26. I’d even settle with a yucky PB one
Don’t forget the $900 S&B too broI’ve been saying the same thing for years. Maybe someone will offer me a salty post 14 AX with the 13” hand guard for my PVS 26. I’d even settle with a yucky PB one
I recently bought a 2011 AW from a local guy getting out of the game.
Low mileage MSA 260 barrel, AI brake and Seekins rings.
Now to get rid of the terrible Viper skins and track down some original thumbhole skins. Right now it is looking like skins are going to be hard to find.
I am thinking this will end up being a short barrel 308 with a Covert Suppressor.
Low mileage MSA 260 barrel, AI brake and Seekins rings.
Now to get rid of the terrible Viper skins and track down some original thumbhole skins. Right now it is looking like skins are going to be hard to find.
I am thinking this will end up being a short barrel 308 with a Covert Suppressor.
I recently bought a 2011 AW from a local guy getting out of the game.
Low mileage MSA 260 barrel, AI brake and Seekins rings.
Now to get rid of the terrible Viper skins and track down some original thumbhole skins. Right now it is looking like skins are going to be hard to find.
I am thinking this will end up being a short barrel 308 with a Covert Suppressor.
I would buy your current barrel and brake if you will sell it when you get the short barrel.
What the market will bear on USED Legacy rigs...
As @Huskydriver says...
#gobepoorsomewhereelse
HIGHLY SOUGHT AFTER ACCURACY INTERNATIONAL 97 SM .300 WIN MAG IN BLACK! - Bolt Action Rifles at GunBroker.com : 1064092466
Buy HIGHLY SOUGHT AFTER ACCURACY INTERNATIONAL 97 SM .300 WIN MAG IN BLACK!: GunBroker is the largest seller of Bolt Action Rifles Rifles Guns & Firearms All: 1064092466
www.gunbroker.com
As @Huskydriver says...
#gobepoorsomewhereelse
HEAT’s auctions are all sham bidding anyway. Those fixed price listings are hilarious, though.
*literally anything*
High End Armament: "HIGHLY SOUGHT AFTER"
High End Armament: "HIGHLY SOUGHT AFTER"
.......The video is on MBE Ballistic Solutions website. Mike Barrat, UK is the manufacturer. I would think he did the conversion.However a Accuracy International hinge will fit anything they have with a hinge, so bolting on a different buttstock is not a big deal
Poorness just went to another level...
Buying an AI now seems like getting a Savage
Buying an AI now seems like getting a Savage
Shot out to distance yesterday. 100 yards or 300 yards, it didn't matter: all the Hornady ammo shot like dogshit. 2-3 MOA level of bad. Federal GMM SMK 175gr it is for the Lothar-Walther 1:12 barrels. Hopefully Bartlein barrels show up in stock again in the near future... that said, I'm now wondering how this rifle shoots past 800 yards with FGMM, how it behaves when it hits transonic and subsonic.
MH marked down the Elite Sand AXSRs for those of you who want the best looking AI on dez streetz
“This 308 / 175 SMK works awesome, which means I need to try something else.”
-People, Apparently
-People, Apparently
Wow, that’s a good deal! ES is my second favorite behind SG, so I picked one up last year. I got a good deal from MH, but not quite THAT good (close…).
Thoughts on selling axsa and buying a new rifle for prs?
www.snipershide.com
Help me decide - keep AXSA or sell for custom rifle for PRS
Hi all, I have an AXSA in 6.5 cm which I absolutely love and have shot some PRS matches with. I’m still a beginner but I’m trying to decide if I keep this or sell it for something below. Impact 737r in MDT acc elite chassis - lightest and smoothest bolt lift of the three to keep my on target...
www.snipershide.com
@Krob95Thoughts on selling axsa and buying a new rifle for prs?
Help me decide - keep AXSA or sell for custom rifle for PRS
Hi all, I have an AXSA in 6.5 cm which I absolutely love and have shot some PRS matches with. I’m still a beginner but I’m trying to decide if I keep this or sell it for something below. Impact 737r in MDT acc elite chassis - lightest and smoothest bolt lift of the three to keep my on target...
I am never going to recommend you not be shooting an AI haha. But..... if you do sell it get an AT-XC for PRS or you could put the Vision/AO forend on your AX and make the rifle that bit better for your intended purpose.Thoughts on selling axsa and buying a new rifle for prs?
Help me decide - keep AXSA or sell for custom rifle for PRS
Hi all, I have an AXSA in 6.5 cm which I absolutely love and have shot some PRS matches with. I’m still a beginner but I’m trying to decide if I keep this or sell it for something below. Impact 737r in MDT acc elite chassis - lightest and smoothest bolt lift of the three to keep my on target...
I personally sold my AX for an AT-X as it was my PRS rifle. I haven't looked back.
I have an AXSR for everything else though.
If I had the money I’d do both an AXSR and a custom PRS rifle.
I mean I have the money but I really shouldn’t lol
Run the AXSR at matches. Be a man.
Run the Elite Sand AXSR at matches. Be an elite man.
Run the Elite Sand AXSR at matches. Be an elite man.
I fixed it for you
You can pick up parts for a prs rig at very discounted prices in the px. I say if you want a prs rig build it from the px. You won’t loose anything if you sell it later. You say you have the money so I say conservatively spend it on the prs rig and make the decision later to keep or sell the AX
It’s not hard to get parts to build a prs rig. Biggest reason is you can roll a $350 krg until you can get that $1500 matrix. Its just a mix of parts
Where the AI is a system. To get another AX will cost you $5500 ish on the used market. That’s a harder pill to swallow vs $500-$1500 pieces along the way
The only way to save money on an AI realistically is to move down models. So make sure you want to sell it because it’s much harder to get back. Unless your rolling in $$
Well I’m sold, @PrecisionRifleGuy let me know if I can sleep on your couch for a few weeks.
Thinking about your rifle as a system is the key. You can buy the parts and throw them together but that isn't a custom rifle built by a gunsmith who knows how to get the whole to be greater than the sum of the parts.
AIs are a system. The TacOps I just bought is a great example of a system that performs at a level that is greater than the sum of the parts.
I know a few who learned this the hard way.
There was one for sale recently with the AO. The only downside to adding the AO as far as resale goes is you’ll have the cost of the AO chassis which can be bonded. But then a AX chassis which won’t sell for much as you can’t find AI actions only.
Another option is buy a ATX for $3000-$3500 used. Run the same barrels/bolts as your AX. Then sell whatever you don’t use. Or keep both.
Do both. Don’t sell the AI. I mentioned that in the other thread and will echo it here. I should’ve kept the ELITE sand AXSA I had and just built the comp gun separate instead of fucking around and changing and selling my AX. Trust me, in the long run, you’ll be happier.
