Beautiful stickAXMC Elite Sand 338lm
Can you tell me where you got that bullet sleeve. Does it hold larger calibers? How many in one sleeve?
Thank you
Beautiful stickAXMC Elite Sand 338lm
I've been pondering both the 6mm GT and the 25 Creedmoor with Blackjack 131gr ACE bullets. Shot @canezach 's 25 Creedmoor this past weekend and loved it, extremely flat... he was at 14.2 mils for 1660 yards and I was at 18.5 mils with my 6.5 Creedmoor at the same distance. Granted all I had on hand were factory Hornady 147 Match, but even with handloads I can't get that flat out of my 6.5 Creedmoor. And it's not so much how flat it shoots because we can always adjust our elevation, it's wind, I hold wind, and the less I have to hold the less errors I makeYou all know what I just got delivered....Whoooo hoooo
My LH AXMC is complete
View attachment 7338886
The question I have now is what caliber. My AT handles both 308 and 6.5 Creedmoor.
Not sure I want to run the AXMC short action in 6.5 CM as I already have that. What caliber would you guys choose if you were thinking of adding a new short action caliber to your stable
Enhancing the image in the pic it appears to be Praesidia Rifle Accessories in the UK: https://www.praesidiarifles.co.uk/Beautiful stick
Can you tell me where you got that bullet sleeve. Does it hold larger calibers? How many in one sleeve?
Thank you
You all know what I just got delivered....Whoooo hoooo
My LH AXMC is complete
View attachment 7338886
The question I have now is what caliber. My AT handles both 308 and 6.5 Creedmoor.
Not sure I want to run the AXMC short action in 6.5 CM as I already have that. What caliber would you guys choose if you were thinking of adding a new short action caliber to your stable
Does anyone know who makes these mag bottom covers?
Looks like an old Seekins 0+ baseplate. I contacted Seekins about making some and they said they had no interest in making more. Best bet is DPET Fabrication. Link belowDoes anyone know who makes these mag bottom covers?
I shoot a lot of 130 grain 6.5 CM and it rocks out to 1350 which is the longest distance I have near me.I've been pondering both the 6mm GT and the 25 Creedmoor with Blackjack 131gr ACE bullets. Shot @canezach 's 25 Creedmoor this past weekend and loved it, extremely flat... he was at 14.2 mils for 1660 yards and I was at 18.5 mils with my 6.5 Creedmoor at the same distance. Granted all I had on hand were factory Hornady 147 Match, but even with handloads I can't get that flat out of my 6.5 Creedmoor. And it's not so much how flat it shoots because we can always adjust our elevation, it's wind, I hold wind, and the less I have to hold the less errors I make
I shoot a lot of 130 grain 6.5 CM and it rocks out to 1350 which is the longest distance I have near me.
I am thinking of the 6 GT but not sure what it will buy me over the 6.5 CM other than recoil. Lower recoil is not a motivator for me as I shoot the 338 LM a bit. I am not shooting fast drills.
I have also been thinking that I am glad I have all the parts for the short action but maybe I'll get a 300 NM or a single feed 375 CheyTac barrel. I'll keep short action on the AT and LA on the AXMC.
Decisions like this are awesome
Contact @softcock he made several ammo binders for me. Good guy and top notch products. Way cheaper than $90. Sorry for the shitty photos.Beautiful stick
Can you tell me where you got that bullet sleeve. Does it hold larger calibers? How many in one sleeve?
Thank you
Berger is about to drop the .257 hybrid too.
Contact @softcock he made several ammo binders for me. Good guy and top notch products. Way cheaper than $90. Sorry for the shitty photos.
He made a 300 prc binder for me which is cip length. Not sure if this is what you are after, just an optionYes I have several of his products. I don't think he makes a large capacity magnum cartridge binder
Beautiful stick
Can you tell me where you got that bullet sleeve. Does it hold larger calibers? How many in one sleeve?
Thank you
Yes I have several of his products. I don't think he makes a large capacity magnum cartridge binder
Love the thumb hole!! Nice axmc tooView attachment 7339744
View attachment 7339745
As I mentioned earlier in the thread, I’m a big fan of the thumbhole aesthetic, so I decided to get an AISC 2.0 chassis and skin kit for my 700.
Here’s a family photo with the AXMC. I now have 1.5 AIs
Came home to a sweet #mailcall
View attachment 7340238
I just loaded up the mag and was able to feed 6.5 creedmoor just fine. Worked great from The first round to the last.
Video or it didn't happen....
@Huskydriver see you at the range bright and early tomorrow! @Mr. F you in?Mmmmhmmm it's go time tomorrow. Can't wait to ditch the mag adapter
I’m so glad I got this elite sand. It looks awesome. And the black contrast parts look really good too.Omg elite sand MC plus black ASR 308 mag equals SECHS. That looks so good. I’m thinking maybe I abandon my Dark Earth plans and have my TBAC 338SR done in Elite sand to match. Elite sand plus proof CF barrel plus Elite sand Can. Yep.
so many choices.
@MACHTECH we need way more Elite Sand AXSR pics. Help me OB1. You’re my only hope.
good morning range therapy session ! With @Mr. F @Huskydriver
View attachment 7341112
nice rigs! What is the wrapping around your scope?
.243!Super late to the AI party but had to save my pennies for a while... .243win currently and have a .308 proof carbon barrel on order. View attachment 7341266View attachment 7341267View attachment 7341265View attachment 7341264
.243!
I have never thought about that caliber. How do you like it? What ammo do you use? How is the feed reliability?
Thanks!Feeds fine and it's a barrel burner
Haven’t had any failure to feed or any reliability issues so far. Only sits at 138rds at the moment but so far so good. I’m shooting the 105gr nosler RDF’s at 2966 (slower I know but my powder selection didn’t reflect the book data). I’ve been using Sig brass (cost effective and super nice for the price) No recoil what so ever, watching trace and impacts through my scope..243!
I have never thought about that caliber. How do you like it? What ammo do you use? How is the feed reliability?
Ohhhhh mama!! That’s nice!I put the shorty 308 barrel on. Time to play with some subsonics. View attachment 7341340
Shot the AXSR for the first time today. Bore Sighted @ 200 yards, 2 shots and was in the red. 300 Norma Magnum with factory 230 grain Berger Match. Now I have to pickup reloading dies and some heaver bullets!
Love the pics. Sweet rig. Can’t wait until 300wm hit the states. Your pics are keeping me going
View attachment 7341248
View attachment 7341249
View attachment 7341250View attachment 7341251
View attachment 7341252
Since recently acquiring my new to me Elite Sand AXMC. I have thoroughly enjoyed shooting it and personalizing it to me. this is my new all time favorite bolt action rifle.
thanks to @Huskydriver for pushing me to the AI side !! now if only those bullets would reload themselves.!!
View attachment 7341706