Spent a couple of days up at the Whittington Center in NM. Barrett had a monopoly on the high power long range so I only was able to shoot the 308 and 6.5CM barrels. Spent the entire time on the high power silhouette range. Beautiful facility!
A little AI vs Barrett action today. The 6.5 Creedmoor was out shooting that old tired 308! Well not really old, just getting put down by all the new wonder rounds as of late... 
Thanks for the offer. Do you know what would happen if you sent in a full-power S for a repair? That's what has kept me from spending extra on some of the full-power IR devices that are floating around out there. I know Wilcox has a history of sending stuff back neutered. I kinda like that the SES would theoretically have factory support.
^ I’ve never heard of a Raptar having issues to be sent I for repair? But since it’s a legit demo unit it should be fine? It’s not one of the ones that were turned to fill power aftermarket.
Here’s a ai pic to not completely derail the thread
Here’s a ai pic to not completely derail the thread
Cover it with blue painters tape, then heavy bat grip tape and then do your camo spray paint !Now you just need to spray paint that $4500 TT to match....
It will always be good as new underneath for you potential resale.
Last edited:
A little prone shooting with my son today... and that crappy 308 barrel!
Oh and these were with some 150 gr plinkers I loaded up back in 2006. Running low on Varget and just using what I got already loaded.
Oh and these were with some 150 gr plinkers I loaded up back in 2006. Running low on Varget and just using what I got already loaded.
Nice (but hot) day out here in TX. Had the AXSA out to 1050 yards with factory Hornady 140 ELD-M. Lucky to have access to a range with 1100, but the AX wants more!
From our neighbors across the pond. Still a fan of the 3 position safety.
I started reading this thread from page one to learn about AI’s inside and out because I wanted to sell my Desert Tech SRS-A1 to get an AT. I started with a TRG-22, sold it to try the SRS because I thought the bull pup looked awesome loved the compactness.
Well! I made it to page 95 before I fell to the AI curse and bought a 2020 dark earth AX308 with a LW 24” 308 barrel and tac brake today haha
I figured I was probably going to want an AX one day so why get one more rifle to upgrade, just skip to the end.
Package also includes a 26” 6.5 Creed barrel and a 26” 6 Dasher barrel, both MTU’s with heathen brakes. Also coming with the AI Comp trigger and the original.
This is going to be a painful couple weeks while I wait for it to arrive. I blame you all equally. Lol.
Couple pics from the seller:
Well! I made it to page 95 before I fell to the AI curse and bought a 2020 dark earth AX308 with a LW 24” 308 barrel and tac brake today haha
I figured I was probably going to want an AX one day so why get one more rifle to upgrade, just skip to the end.
Package also includes a 26” 6.5 Creed barrel and a 26” 6 Dasher barrel, both MTU’s with heathen brakes. Also coming with the AI Comp trigger and the original.
This is going to be a painful couple weeks while I wait for it to arrive. I blame you all equally. Lol.
Couple pics from the seller:
Attachments
Glad I could assist in spending a god awful amount of your money.
Almost there... Now ya just need a Vision chassis & you're set! Haha
That $440 dollars almost makes it feel like an AXSR… if you close your eyes
Looks like it could be @pfl338 's rider...
This one...
Though it looks like he updated it to this one...
This one...
Though it looks like he updated it to this one...
Last edited:
I updated to hardware that does not require any tools. If the user feels the need to go beyond hand tight they can use a cartridge rim to tighten/loosen the rider. That one is a 2.8" tall, I also make a 2" tall, which is what I am now using. Also a 1.6" tall version with a half round bottom.
They are printed in black petg, you have to paint them yourself if basic black doesn't work for you. the one on my rifle is camo painted, holds up pretty well.
Spent some time this afternoon mounting a few parts and getting it dialed in, hard not to love this one. Target shown below are shots 16-20 out of this barrel with factory Lapua 139 Scenars.
. 
. 
It's an aftermarket chassis designed by me and The Vision Chassis in Norway. It's available now from GCP Rifle Co in Florida HERE
Here is a thread with all the info going back to the original design https://www.snipershide.com/shooting/threads/aftermarket-ai-obsession-chassis-group-buy.6984036/
Any questions, let me know!
Sam
Spent the morning working on position and recoil management with the 338LM out at TacPro
Where's the rifle? I can't seem to see it in the picture...
Do you guys think this scope will out perform a ZCO or TT on my AI??
Because University of Feenix is still a thing.Seriously, how are people dumb enough to buy in to that shit??
Seriously, how are people dumb enough to buy in to that shit??
Ask Grand Master Jay. Im sure he has one on his AR M16 Sniper Killa rifle.
Last edited:
I hope I am not breaking any forum rule by posting this completed GB auction: an authentic German Contract G22 overrun sold for 70k. One of the ten such rifles imported to the US:
Accuracy International AI German Bundeswehr G22 300WM Scharfschützengewehr - Bolt Action Rifles at GunBroker.com : 909060687
Buy Accuracy International AI German Bundeswehr G22 300WM Scharfschützengewehr : GunBroker is the largest seller of Bolt Action Rifles Rifles Guns & Firearms All: 909060687
www.gunbroker.com
A little hefty… weights came out great.
Sunday is always 1,000y day at Quantico. The AXMC in 300 PRC remains dead on.
