• New Contest Starting Now! This Target Haunts Me

    Tell us about the one that got away, the flier that ruined your group, the zero that drifted, the shot you still see when you close your eyes. Winner will receive a free scope!

    Join contest

Gunsmithing action wrench?

Re: action wrench?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ300MAG</div><div class="ubbcode-body">If you have access to a mill make one... </div></div>

i have a budy that does and may do just that.

any tips?
 
Re: action wrench?

DSC00055.jpg


1-1/8" thick CRS. Bore hole to 1.355", split. Mill notch down to bottom of radius 1.180" wide. Drill&tap for 1/2-20 SHCS's. Have someone that knows how to weld, 1" diameter CRS handle 18" long. Wrench fits action behind the recoil lug. Enjoy...
 
Re: action wrench?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AJ300MAG</div><div class="ubbcode-body">
DSC00055.jpg


1-1/8" thick CRS. Bore hole to 1.355", split. Mill notch down to bottom of radius 1.180" wide. Drill&tap for 1/2-20 SHCS's. Have someone that knows how to weld, 1" diameter CRS handle 18" long. Wrench fits action behind the recoil lug. Enjoy... </div></div>

you sir are a saint
 
Re: action wrench?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: keydiverfla</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 42769vette</div><div class="ubbcode-body">i was told that a mauser wrech will work fine.

</div></div>
It will. </div></div>

+1

I attached my handle to the side of mine.... Remington on one side, Win/Mauser on the other.... drill/tap your holes all the way through....
 
Re: action wrench?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dinc</div><div class="ubbcode-body">I have one of the Midway Rem 700 wrenches. Just flip the the wrench cap to the flat side for the bottom of a Win 70. </div></div>

will it also fit a Mauser this way?