Before I begin here, let me state that I'm entirely aware of the limitations of the AR15 and the 5.56 cartridge when it comes to performing as a precision rifle, so ... no need to head that direction, if you don't mind.
I purchased another AR recently and one of my reasons was to turn it into more of a longer range/precision platform, it is a Daniel Defense M4 V7.
My question simply is what should I consider doing to it to improve its accuracy. I'm not looking to put into another stock system, but basically simply to "upgrade" it from stock to customized enough to improve its accuracy. I should also mention I have and will be putting in a Geissele SSA-E system into it.
Here are the specs on the rifle:
I purchased another AR recently and one of my reasons was to turn it into more of a longer range/precision platform, it is a Daniel Defense M4 V7.
My question simply is what should I consider doing to it to improve its accuracy. I'm not looking to put into another stock system, but basically simply to "upgrade" it from stock to customized enough to improve its accuracy. I should also mention I have and will be putting in a Geissele SSA-E system into it.
Here are the specs on the rifle:
- LOWER RECEIVER: Mil-Spec with Enhanced Flared Magazine Well and Rear Receiver QD Swivel Attachment Point. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- UPPER RECEIVER: Mil-Spec with Indexing Marks and M4 Feed Ramps. CNC Machined of 7075-T6 Aluminum, Type III Hard Coat Anodized
- BARREL: Chrome Moly Vanadium Steel, Cold Hammer Forged, 1:7 twist, 16″ Government Profile, Mid-length Gas System, Chrome Lined, MP tested, and Mil-Spec Heavy Phosphate Coated
- GAS SYSTEM: Pinned Low Profile Gas Block CNC Machined of 4140 hardened steel and Mil-Spec Heavy Phosphate Coating, Mid-length, Direct Impingement
- MUZZLE DEVICE: Daniel Defense Flash Suppressor, 17-4 PH Stainless Steel, Salt Bath Nitride Finished
- BOLT CARRIER GROUP: M16 Profile, Mil-Spec MP Tested, Chrome Lined, Properly Staked Gas Key
- BUFFER: H Buffer
- SIGHTS: Sold Separately
- HANDGUARD: Daniel Defense Modular Float Rail™ 12.0, CNC Machined of 6061-T6 Aluminum, with three Modular Picatinny Rail Sections, Type III Hard Coat Anodized
- RECEIVER EXTENSION: 6 Position Mil-Spec 7075-T6 Aluminum
- BUTTSTOCK: Daniel Defense Buttstock, Glass Filled Polymer with Soft Touch Overmolding
- PISTOL GRIP: Daniel Defense Pistol Grip, Glass Filled Polymer with Soft Touch Overmolding
- Made in the USA!