Affordable KRG Butt stock weights

[cattleman99]

Hello all,

We are now making these KRG butt stock length of pull spacers out of steel. Cheaper than others, but just as good. Let me know if you’re interested! These are 3/8" thick and weigh 0.65 lbs.

 

[King_beardsly]

Could be useful to balance out my current rig

 

[sam4886]

What are we talking for a price on these? And weight?

 

[atomic41]

What are we talking for a price on these? And weight?

Wondering the same.

 

[cattleman99]

What are we talking for a price on these? And weight?

$17.50 each, or a set of 3 for $50. I’ll have a weight for you today hopefully

 

[308pirate]

$17.50 each, or a set of 3 for $50. I’ll have a weight for you today hopefully

Very nice

 

[308pirate]

@cattleman99 are your spacers the same thickness as the KRG plastic spacers? How are they finished (black oxide, Rust-oleum, cerakote)?

 

[FLguy55]

I'm probably in. Just wanna verify the weight and finish like 308pirate asked. I'm in the market for these right now.

 

[FLguy55]

On another note, has anyone tried filling in the open space inside the butt stock on the bravo, when you remove the bottom piece? Seems like an ideal way to add weight. Just considering what to put in there, like pack in BBs or something?

 

[cattleman99]

@cattleman99 are your spacers the same thickness as the KRG plastic spacers? How are they finished (black oxide, Rust-oleum, cerakote)?

3/8” thick. I’ll have a specific weight this afternoon, but I believe they will be comparable to KRG’s offering.
Black oxide finish. I may be able to arrange cerakote if folks want different colors, but price will go up.

 

[cattleman99]

On another note, has anyone tried filling in the open space inside the butt stock on the bravo, when you remove the bottom piece? Seems like an ideal way to add weight. Just considering what to put in there, like pack in BBs or something?

I’ve used adhesive wheel weights. Another option is to line the cavity with a plastic wrap and fill it will lead shot/epoxy.

 

[MarinePMI]

I’ve used adhesive wheel weights. Another option is to line the cavity with a plastic wrap and fill it will lead shot/epoxy.

Or a small ziplock bag with lead shot...

 

[308pirate]

3/8” thick. I’ll have a specific weight this afternoon, but I believe they will be comparable to KRG’s offering.
Black oxide finish. I may be able to arrange cerakote if folks want different colors, but price will go up.

Perfect.

Nitriding them (what KRG does) is stupid overkill that does nothing to improve functionality or durability and just makes them more expensive.

 

[308pirate]

On another note, has anyone tried filling in the open space inside the butt stock on the bravo, when you remove the bottom piece? Seems like an ideal way to add weight. Just considering what to put in there, like pack in BBs or something?

That works for the Bravo but not for the X Ray

 

[cattleman99]

Perfect.

Nitriding them (what KRG does) is stupid overkill that does nothing to improve functionality or durability and just makes them more expensive.

Those were my exact thoughts. The butt stock spacers are a low wear area. Folks want to add weight without spending an arm and a leg, and that's what we have come up with.

 

[atomic41]

I'm in the market as well and too busy to fab my own so I will probably get these.

 

[PAYDIRT]

I've been waiting for someone to do this, almost went to the local machine shop and told them

 

[cattleman99]

These are up on the website now for pre order. We hope to start shipping early next week. I will post the weight of them when we get a chance to weigh one.

Snyder Precision LLC

snyderprecisionllc.com

 

[PAYDIRT]

You had me until "pre order" I'll just wait.

 

[cattleman99]

You had me until "pre order" I'll just wait.

You bet. We’ll be shipping them early next week. The first batch is already being made.

 

[cattleman99]

Update - These weigh 0.65 lbs each

 

[DOA]

Ordered 2.

 

[cattleman99]

Ordered 2.

Thanks! They should be shipping earlier than I expected, so Thursday or Friday this week.

 

[cattleman99]

The first batch is almost sold out, and more material is on the way. Thanks to those who have ordered!

 

[drew_235]

The first batch is almost sold out, and more material is on the way. Thanks to those who have ordered!

Just ordered a 3 pack.

 

[cattleman99]

Just ordered a 3 pack.

Thanks!

 

[Bear9350]

I just pulled a spacer off my chassis tonight so I could model it up and get some steel spacers cut the next time I put an order of steel in to be laser cut. I need to add a little over 1-3/4" of spacers for my length of pull and was curious how much weight I could add. Looks like it should be about 3.25 lbs.

 

[fcyle10]

Just ordered a two pack

 

[cattleman99]

All orders have been shipped. We have some more available, and more material on the way!

 

[cattleman99]

To the top

 

[LV Precision]

Just ordered 1 for my T1x Bravo, looking forward to putting it on!

 

[cattleman99]

Just ordered 1 for my T1x Bravo, looking forward to putting it on!

Thanks!

 

[Watchale]

Would be awesome if you made some affordable M-loc weights to mount on the side of a chassis ?

 

[cattleman99]

Would be awesome if you made some affordable M-loc weights to mount on the side of a chassis ?

Funny you should say.... we have some projects in the works

 

[cattleman99]

Bump

 

[pyplynr]

Order placed!

 

[LV Precision]

Ordered on Sunday, on my gun by Wednesday! Fits great, adds a good bit of weight, and really happy with the purchase.

Hoping there are some MLok compatible weights that will fit the Bravo coming up next!

 

[CaptNemo]

How about a brass ARCA rail that’s a little thicker material and no lightening cuts ?

 

[MarinePMI]

Brass is pretty soft, don't you think?

 

[cattleman99]

Brass is both expensive and a little softer than I’d like. We may do something out of steel in the future

 

[CaptNemo]

Does an ARCA rail take much abuse ?
You could do one out of stainless and it would probably be a few grams lighter than a brass one. The SS would be much more robust than a brass piece.

 

[mtnhunter22]

Tag to pick up later.

 

[MarinePMI]

Does an ARCA rail take much abuse ?
You could do one out of stainless and it would probably be a few grams lighter than a brass one. The SS would be much more robust than a brass piece.

Everytime I drop the foreend of my rifle across a barricade or car door window, I'd imagine it would get beat up after awhile, not allowing something to slide smoothly down the rail. Just a thought...

 

[mtnhunter22]

Does an ARCA rail take much abuse ?
You could do one out of stainless and it would probably be a few grams lighter than a brass one. The SS would be much more robust than a brass piece.

My arca rails are usually taking quite a bit of abuse. Between riding obstacles and barricades and the tripod sliding up and down.

 

[cattleman99]

Spacers in stock and ready to ship!

 

[MarinePMI]

Interested in the MLOK weights for the fore end...

 

[cattleman99]

Interested in the MLOK weights for the fore end...

They're in the works, although I can't say for sure. Hopefully within a few weeks.

 

[C.R. Adams]

Following

 

[408w]

Tag

 

[Ryan7839]

Curious how this shape relates to the spacers in the Bergara HMR stocks? I’m having some cut right now. If these are the same/similar that may be another application/market for these.

if you have access to one of these line them up and let us know!