Rifle Scopes Alloy or steel scope base for aluminum scope?

#4
Re: Alloy or steel scope base for aluminum scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JelloStorm</div><div class="ubbcode-body">So this base is the right one for my needs?

http://www.triadtactical.com/Badger-Alloy-Base306-06A-Rem-700SA-20MOA.html

</div></div>

Correct.

Remington 700-Check, Short Action-Check, 20MOA Cant-Check, Alloy-Check.

You should be GTG with that base and alloy/alumin. rings.
 
#5
Re: Alloy or steel scope base for aluminum scope?

I have use aluminum rings(Seekins) and steel base(Badger) and steel rings(Badger) and aluminum bases(Seekins)and never had any problems with any other them in different combinations. Buy quality and you will be fine no matter what they are made of.
 
#6
Re: Alloy or steel scope base for aluminum scope?

I've just always assumed that an aluminum scope + rings will expand and contract the same at various temps. so it's good the scope and rings be teh same material. Wasn't sure on the base tho.
 
#7
Re: Alloy or steel scope base for aluminum scope?

I call BS on the whole expansion and contraction argument in regards to scopes, rings and bases. Never saw any evidence it makes any difference.
 
#9
Re: Alloy or steel scope base for aluminum scope?

I would say that you are good to go with either. You are gonna have to hit some pretty extreme temps to get your metal to expand or contract to a degree that it will affect anything. If you are worried about it, buy the matching set. Or if you shoot in Death Valley or the Antartic a lot it might make sense also.

I shoot in AZ. We hit temps up to 110-115 all summer long. I have never noticed any of my quality gear change or suffer from the temps.

Good luck and get what makes you happy.

-Nate
 
#10
Re: Alloy or steel scope base for aluminum scope?

There's less to worry about with the temp changes than there is to match the surface hardness for the materials being used.

Putting steel rings on an AL base is going to cause problems with heavier recoil (308's or larger, 223's are pretty insensitive) because there's a bearing stress condition problem.

If you want to put a good set of rings and bases but still save a little coin, I'd suggest the Burris XTR's and an EGW base. I used them this weekend for a home shop 6.5-06 I did for a buddy, worked out very nicely.
 
#11
Re: Alloy or steel scope base for aluminum scope?

I have Badger Ord steel rings, and i'm going to buy Aluminium base EGW , for tikka t3 tactical.. Is a good combo?? I don't know much EGW. Thanks
 
#12
Re: Alloy or steel scope base for aluminum scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SAS_Sniper</div><div class="ubbcode-body">I have Badger Ord steel rings, and i'm going to buy Aluminium base EGW , for tikka t3 tactical.. Is a good combo?? I don't know much EGW. Thanks </div></div>

No, see my post directly above.

The parts by themselves are all excellent, but steel and AL don't mix well.

I see nothing wrong with badger rings or EGW's stuff, in fact, I'd applaud it.

You should spend the extra $20 to put a Steel EGW base on that Tikka, or get the EGW base and put some AL rings that are not hardcoated on there. The surface hardness is what you're aiming to match.
 
#13
Re: Alloy or steel scope base for aluminum scope?

I live in Italy,and unfortunately midway Italy don't have steel base..
frown.gif
Here is difficult to find steel mounts for tikka t3 ..
 
#14
Re: Alloy or steel scope base for aluminum scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SAS_Sniper</div><div class="ubbcode-body">I live in Italy,and unfortunately midway Italy don't have steel base..
frown.gif
Here is difficult to find steel mounts for tikka t3 .. </div></div>

What about AL rings?
 
#15
Re: Alloy or steel scope base for aluminum scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rob01</div><div class="ubbcode-body">I have use aluminum rings(Seekins) and steel base(Badger) and steel rings(Badger) and aluminum bases(Seekins)and never had any problems with any other them in different combinations. Buy quality and you will be fine no matter what they are made of. </div></div> I am using the same deal, nightforce steel base and alum/alloy rings works perfect even after 500-600 rounds I had no shifting or change in POI. Buy quality get quality results!
 
#16
Re: Alloy or steel scope base for aluminum scope?

I have shot thousands of rounds with mixed set ups in everything from .223 to 300WM. I wouldn't sweat aluminum and steel mixed as long as they are quality.
 
#18
Re: Alloy or steel scope base for aluminum scope?

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Rob01</div><div class="ubbcode-body"><span style="font-weight: bold">I have shot thousands of rounds with mixed set ups in everything from .223 to 300WM</span>. I wouldn't sweat aluminum and steel mixed as long as they are quality. </div></div>

these words comforted me
laugh.gif

Almost i ordered EGW mount...
 
#19
Re: Alloy or steel scope base for aluminum scope?

I will argue this point with anyone at anytime...

I have used steel and aluminum rings with steel and aluminum bases... and all of the above with steel receivers and aluminum scope tubes... I have NEVER had any problems with any of them at any time... PERIOD!!

I will sit back now and wait for someone to show me proof that it does make a difference.

DK
 
You must log in or register to reply here.

Similar threads

gr8fuldoug
Spotters Athlon Spotting Scopes
Replies
0
Views
244
gr8fuldoug
gr8fuldoug
gr8fuldoug
Optics Athlon Spotting Scopes
Replies
0
Views
136
gr8fuldoug
gr8fuldoug
Beasler1
SOLD XM3 Full Clone Build Kit
Replies
8
Views
2K
Beasler1
Beasler1
300PRC
Accessories RCBS Accessory Base Plate 3, NightForce 40 MOA Steel One-Piece Base, Badger Ordnance Steel 34 MM Dia. Rings
Replies
1
Views
384
300PRC
300PRC
NLivingston
Rifle Scopes Area 419 Tactical One-Piece Scope Mount
Replies
12
Views
3K
koshkin
koshkin
Top Bottom
Back
Home
Forums
Merch
Alerts