Altering AICS mags?
- Thread starter fw707
- Start date
Re: Altering AICS mags?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AvsFan</div><div class="ubbcode-body">Out of curiosity - what are you attempting to do w/the modified mags (if you're successful)?
AvsFan
</div></div>
I'll be able to run an OAL of 2.985 without the spacer.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AvsFan</div><div class="ubbcode-body">Out of curiosity - what are you attempting to do w/the modified mags (if you're successful)?
AvsFan
I'll be able to run an OAL of 2.985 without the spacer.
Re: Altering AICS mags?
I took one of my mags apart to examine it and the seam appears to be solidly welded along its entire length. I don't see the mag splitting apart under normal use with the modification you are proposing. These appear to be constructed the same way. You can always "sacrifice" one of the Accurate mags and save a few bucks.
I took one of my mags apart to examine it and the seam appears to be solidly welded along its entire length. I don't see the mag splitting apart under normal use with the modification you are proposing. These appear to be constructed the same way. You can always "sacrifice" one of the Accurate mags and save a few bucks.
Re: Altering AICS mags?
Remove the bottom plate/spring and follower and with a dremel tool from the inside of the now empty box magazine, you can dremel the spacer at the location of the spot welds and the spacer plate falls right out. Replace the follower/spring and put the bottom plate back in place and you're GTG. You cannot tell it's messed with at all.
Remove the bottom plate/spring and follower and with a dremel tool from the inside of the now empty box magazine, you can dremel the spacer at the location of the spot welds and the spacer plate falls right out. Replace the follower/spring and put the bottom plate back in place and you're GTG. You cannot tell it's messed with at all.
Re: Altering AICS mags?
Thanks everybody for the info!
I need to load some VLD's out a little longer to touch the lands, and they won't fit the mag unless the plate is removed.
The Alpha Mags would work, but I didn't want 10 round mags.
Thanks again!!
Thanks everybody for the info!
I need to load some VLD's out a little longer to touch the lands, and they won't fit the mag unless the plate is removed.
The Alpha Mags would work, but I didn't want 10 round mags.
Thanks again!!
Re: Altering AICS mags?
While on the topic of AICS mags do you polish the inside of the feed lips??
While on the topic of AICS mags do you polish the inside of the feed lips??
Re: Altering AICS mags?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HM Spike</div><div class="ubbcode-body">While on the topic of AICS mags do you polish the inside of the feed lips?? </div></div>
I do
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HM Spike</div><div class="ubbcode-body">While on the topic of AICS mags do you polish the inside of the feed lips?? </div></div>
I do
Re: Altering AICS mags?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fw707</div><div class="ubbcode-body">Thanks everybody for the info!
I need to load some VLD's out a little longer to touch the lands, and they won't fit the mag unless the plate is removed.
The Alpha Mags would work, but I didn't want 10 round mags.
Thanks again!!</div></div>
The Alpha 10 rd mags are quite a bit smaller than he AI ones BTW.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: fw707</div><div class="ubbcode-body">Thanks everybody for the info!
I need to load some VLD's out a little longer to touch the lands, and they won't fit the mag unless the plate is removed.
The Alpha Mags would work, but I didn't want 10 round mags.
Thanks again!!</div></div>
The Alpha 10 rd mags are quite a bit smaller than he AI ones BTW.
Re: Altering AICS mags?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HM Spike</div><div class="ubbcode-body">While on the topic of AICS mags do you polish the inside of the feed lips?? </div></div>
Yes.
I smooth them up with fine sandpaper like a 400 grit just to remove any burrs and rough spots.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: HM Spike</div><div class="ubbcode-body">While on the topic of AICS mags do you polish the inside of the feed lips?? </div></div>
Yes.
I smooth them up with fine sandpaper like a 400 grit just to remove any burrs and rough spots.
