Like the question above asks. With the tallest Nightforce ultalight unimount, my scope hits the handguard. The 20 moa probably isn't helping either. I was just wondering what I should switch to to clear it. The scope is a Konuspro M30 and I really like the scope. It has proven itself on my m14.
Rifle Scopes Anyone running a 56mm objective on the XLR chassis?
- Thread starter 100meterpeter
- Start date
EGW high rings had plenty of room to mount a Sightron S Tac scope on my XLR with 20 MOA rail.
OD of that objective is 65 mm
OD of that objective is 65 mm
Using an ADM Recon mount atop a 20moa base for my Mk8 3.5-25x56 on an XLR with no issues ( I don't have a top rail mounted on the XLR ).
I've got an XLR Carbon and an ATACR. Problem is, my barrelled action is still several months away :/
But I got a set of ARC M10 x-high rings. Based on my calculations, they should work. There is a formula on XLR's website for determining needed right height.
But I got a set of ARC M10 x-high rings. Based on my calculations, they should work. There is a formula on XLR's website for determining needed right height.
Using Badger 1.275" rings on a 20moa base, there is close, but adequate, clearance on my S&B 5-25 with lens cap.
