AR 10 load data

[762nato]

OK managed to find an AR-10 up here in Canada(not entirely to easy), need load data for 155, 168 Bullets. What works well.

Thanks in advance...

Andy

 

[armydog]

Re: AR 10 load data

43gr Win W748, Win brass, Win Large Rifle Primers, SMK 168gr. I drop to 42 gr W748 with Mil Surp Brass.

 

[nfoley]

Re: AR 10 load data

For my gun 168 SMK or Amax with 44g varget seated to 2.800" in winchester brass and WLR primers. Rifle is POF 308. Hard for me to complain about this load. Good groups, no signs excessive pressure, decent velocity (even though barrel is 14.5"). In next week or so gonna see what the 175 SMK does with Varget.

 

[ClayDirt]

Re: AR 10 load data

My load running thru AR10T 20" in the so called nm match factory Armalite barrel. 1:10 twist. Shoots about a minute of angle.

175 SMK
43.5g RL15
CCI # 200
Win Brass trimmed to 2.005
COAL 2.840

 

[pacomdiver]

Re: AR 10 load data

anyone got a load using imr4064?im gonna start reloading for my ar10

 

[archad]

Re: AR 10 load data

46grs TAC 155 Nolser CC COL 2.775 5 MOA

 

[ClayDirt]

Re: AR 10 load data

Another:

Lapua 155 scenars
43.2 IMR 8208 XBR
CCI # 200 Primers
Win brass trimmed 2.005
2.840 COL

3/4 MOA

This load is very easy on brass and will shoot 3/4 moa 5 shot groups all day long.

 

[ejb]

Re: AR 10 load data

archad 5 moa or .5 moa ?

 

[SMH]

Re: AR 10 load data

155 Amax
45.6 Varget
Lapua Brass
CCI BR2
2.805 OAL
~2830fps

Very Accurate in my 26 inch RRA LAR8.

I fired a 3 shot group at 100 today to check zero (loaning it to a friend for a match over the weekend). It was right at 1/2 MOA. I fired two more groups at 200 and they averaged around 3/4 MOA. I was very pleased with this considering the breezy conditions.

 

[Michael4yah]

Clay, do you still like the IMR 8208 XBR?

Another:

Lapua 155 scenars
43.2 IMR 8208 XBR
CCI # 200 Primers
Win brass trimmed 2.005
2.840 COL

3/4 MOA

This load is very easy on brass and will shoot 3/4 moa 5 shot groups all day long.

 

[jfields]

My load running thru AR10T 20" in the so called nm match factory Armalite barrel. 1:10 twist. Shoots about a minute of angle.

175 SMK
43.5g RL15
CCI # 200
Win Brass trimmed to 2.005
COAL 2.840

Are you single feeding this? What mag do you have that will hold 2.840?

Sorry, I just realized this post is two years old.

 

[AC Power]

I have two 155 SMK Palma loads I run in my 20" gas 308.
1. 46 gr Varget. - 2700 fps
2. 50 gr 2000MR - 2750 fps
Both uses LC match brass w/ CCI bench rest primers loaded to max mag length.

 

[Unknown]

LC match cases, CCI BR2 primer, 43.5 grains of varget with 175 grain Sierra matchking...for some reason, my rifle likes the same charge with 168 match bullets.

Velocity is 2667 FPS out of my 24 inch barreled rifle W/ a 1-10 twist.