Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I’m putting together my AR10 build and I have a pretty thick contour Proof research barrel and the Wilson combat gas tube is touching the barrel. Will this affect barrel harmonics? Thanks in advance!
Also, that type of nut usually helps with alignment, but it's a lot easier to check and adjust the tube fit into the gas key before you get much further.
I’m putting together my AR10 build and I have a pretty thick contour Proof research barrel and the Wilson combat gas tube is touching the barrel. Will this affect barrel harmonics? Thanks in advance!
I had that issue back in the day on some varmint barrels with .750 gas block journal. it's because you're using a low profile gas block, Proof barrels utilizes a M110 Contour.
Once I started using adjustable gas blocks I never had that issue again due to the fact they are generally taller. Just be cautious when "bending" gas tubes, basically if the gas tube is binding inside the gas key of your BCG you no longer have a free floating barrel.