Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Have a TT special installed on an ARC nucleus, when I run the bolt it resets the safety. I have not had this issue with TTs on other actions, is there a way to fix this, sucks to keep having to flick the safety off every shot. Thanks
Agree with @KnowNothing256; this isn't normal. I also have a TT Special on a Nucleus 2.0, and everything works as it should. I've e-mailed the ARC people about a magazine issue, and they responded within 45 minutes. I'd reach out to them and see what they think, or swap that trigger out with a known good trigger and see what happens—best of luck.
Something is seriously messed up there...here is a pic of mine from the back. Lots of clearance between the bolt shroud and the safety. Can you take the same pic?
I’m wondering if the safety lever is bent inwards (to the left, assuming the video isn’t mirrored). Let’s see those pics of the rear of the bolt, from above.
Guys thanks for all the reply’s and pics, jb0311 the picture from in back reply helped. The safety got a little bent and was hitting the bolt. It was a super easy fix, I should have seen it earlier. Thanks again hide