Gunsmithing Barlock vs wto vs vector?

[Safety_3rd]

I'm looking to build a swtich barrel setup and need to be educated. I'm thinking something like a bighorn action with interchangeable bolt heads. I like the idea of being able to shoot multiple rounds from the same action and stock. Kind of a broad question but I'm looking for some one to point me in the right direction to get started. Thanks in advance

 

[Banango]

Think they stopped selling the barloc because when you smack the barrel your poi changed for 1 shot

 

[Banango]

I'm gonna test my WTO tomorrow to see if I have the same problem or not

 

[M338]

I'm gonna test my WTO tomorrow to see if I have the same problem or not

Be sure to let us know the results.

 

[Praeger]

Barrel changes in the Vector are about as easy as it gets. Loosen two set screws, unscrew the barrel, screw new barrel on, re-tighten set screws.

Here's a video showing ease barrel change, and what you can expect in terms of change to POI.
P Reid Vector Barrel Change Demo

The Vector does not have a floating bolt head, so unlike the Bighorn you'll need a separate bolt to change from .223 to .308/.6mm/6.5mm etc . . .

 

[Banango]

Be sure to let us know the results.

Didnt get out to the range today. Will have to try next weekend

 

[Safety_3rd]

Thanks for the input. I'll have to check out the vector and price out the difference between the bighorn bolt heads vs a vector bolt. I think I like the controlled round feed on the bighorn though...

 

[Praeger]

Thanks for the input. I'll have to check out the vector and price out the difference between the bighorn bolt heads vs a vector bolt. I think I like the controlled round feed on the bighorn though...

You won't go wrong with either. Biggest difference in function will be the bolt throw - 60 vs 90 degree.

 

[drwood96]

Out of the three options, I believe the Vector will be the best option. Several companies are making prefit for it now.

I currently have the barrel nut barloc as I got it before Origin prefits hit the market. It works but I would not call it a quick changing. The shoulder version is a little fast but there’s alway a slight change in zero (0.1 - 0.2 mils). I no experience with the wto.

After I shoot out this barrel, I’ll be going shoulder prefit exclusively. With action wrench and viper barrel vise, a barrel change takes 5 minutes and better RTZ.