Received rifle back from gunsmith and the trigger is to light for my liking, it breaks @ 8oz and would like to adjust to 1.5 lbs. Triggger is on a Remington 700 and I don't have the manual...can anyone post instructions or give a description?
Gunsmithing Basix Trigger Adjustment
- Thread starter irondude
- Start date
Re: Basix Trigger Adjustment
http://www.riflebasix.com/index.php?main_page=page&id=6
Not sure if this helps, but the install instructions are here.
http://www.riflebasix.com/index.php?main_page=page&id=6
Not sure if this helps, but the install instructions are here.
Re: Basix Trigger Adjustment
Thats helpful also looking for the procedure to adjust the screws, I have done many Remingtons but this is not working out the same. Normally I will turn the engagement screw until the firing pin drops and then back out 1/2 turn. Then with firing pin dropped adjust over travel screw unitl it just touches and back out 1/4 turn. Then adjust spring tension for weight of pull.
Thats helpful also looking for the procedure to adjust the screws, I have done many Remingtons but this is not working out the same. Normally I will turn the engagement screw until the firing pin drops and then back out 1/2 turn. Then with firing pin dropped adjust over travel screw unitl it just touches and back out 1/4 turn. Then adjust spring tension for weight of pull.
Re: Basix Trigger Adjustment
I spoke with the manufacture and they walked me through the steps after repeated slam fire checks and determined that the spring is weak and are sending a new replacement trigger...I'm pleased with their customer service and they are presetting trigger weight.
I spoke with the manufacture and they walked me through the steps after repeated slam fire checks and determined that the spring is weak and are sending a new replacement trigger...I'm pleased with their customer service and they are presetting trigger weight.
