Gunsmithing Bench vise suggestions, recommendations

normbal

normbal

CPT USA (ret)
Full Member
Minuteman
Aug 18, 2006
119
13
Silver Spring, MD
www.scribd.com
#1
Preferably American-made.

About 3-4 times a year I work on a project where I can really use a good bench vise. Mostly I wing it using c-clamps and/or a drill-press table vise. That said, I've built a dozen F'N-FALs, about half as many ARs, rebuilt a dozen or so 1911s and S&W wheelguns. But there are times a vise would make a big difference in setup, prep, etc.

So. Started looking around online, reading reviews. Don't want Chinese. Don't need a $500 model. Looking at maybe a 5-6", replaceable jaw pads, swivel base, American-made, around $150.

I'd put up a poll on brands but I'm writing this on my iPhone while SWMBO and daughter are shoe shopping so I don't know how much time I have to write.

Thanks in advance.
 
#4
Re: Bench vise suggestions, recommendations

I like my Wilton 6". If I was buying a new vice I'd try to get a more versatile one that moves on 2 or 3 axis and has pipe clamping provisions. Also, a vice should last multiple lifetimes so take that into consideration when purchasing one.
 
#5
Re: Bench vise suggestions, recommendations

I think you can find a new lower-end Wilton in that price range.

Also keep your eyes open at garage and estate sales - this type of item shows up all the time, and is a pretty low-risk purchase on the used market
wink.gif
 
#11
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: GLOWWORM</div><div class="ubbcode-body">DAM ROSCOE...thats like the Holy Grale of Show Vices ! ! ! ! ! </div></div>

There are those that cost less and a guy can get bent pretty quick if he doesn’t look around. The 400S is around $800 at MSC, considerably less at the listed vendor. The 400S is what I use and I like it a lot. MSC will honor the lower price BTW
wink.gif


With soft jaws from Brownells I can hold any rifle or stock I want and not be concerned about it hitting the floor. Quality jobs/projects start with quality tools and equipment, every time. I use the 400S on every rifle I build, it's as solid as they come.

One thing I hate is cheap quality in tools. Rifle clients deserve and expect no less than our very best effort. I recommended the 400S because of it's quality.
 
#15
Re: Bench vise suggestions, recommendations

The best place I have found to buy a quality vise is Craig's List. We picked up a 165lb 6" Morgan Milwaukee for $150 locally a few weeks ago.

A good condition used vise is on average of $1 per pound.

vise2.jpg

 
#17
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: normbal</div><div class="ubbcode-body">Gotta do more yard sales.</div></div>

If you're smooth, this also counts as quality time with the wife
wink.gif
 
#19
Re: Bench vise suggestions, recommendations

normbal said:
So. Started looking around online, reading reviews. Don't want Chinese. Don't need a $500 model. Looking at maybe a 5-6", replaceable jaw pads, swivel base, <span style="color: #FF0000">American-made, around $150.[/</span>quote]

good luck. to meet your requirements, you will need to find used.
Click to expand...
 
#20
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Eric Bryant</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: normbal</div><div class="ubbcode-body">Gotta do more yard sales.</div></div>

If you're smooth, this also counts as quality time with the wife
wink.gif
</div></div>

Or my teenage daughter, who's looking for another desk.
 
#21
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 300sniper</div><div class="ubbcode-body">
normbal said:
So. Started looking around online, reading reviews. Don't want Chinese. Don't need a $500 model. Looking at maybe a 5-6", replaceable jaw pads, swivel base, <span style="color: #FF0000">American-made, around $150.[/</span>quote]

good luck. to meet your requirements, you will need to find used.</div></div>

Yeah, probably. I've got time. Thanks.
Click to expand...
 
#22
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: seanh</div><div class="ubbcode-body">Yard sales will get you junk from the hardware store, some type of farm/agg sale is great.</div></div>

Depends on who you have for neighbors
wink.gif
"Yard sales" in my area have everything up to and including ag equipment.
 
#23
Re: Bench vise suggestions, recommendations

Found this on eBay. Wilton Model 8400, date inside is 6-50. I sandblasted, manganese parkerized it and refinished it in Brownell's Alumahyde. Left the handle pakerized as it'll get a lot of use and wear. Not bad for $222.22. Pretty much what I was looking for.

338989c6.jpg
 
#25
Re: Bench vise suggestions, recommendations

yeah, me too. I thought they were symmetric. I looked at it after I'd reassembled it and said the hell with it. I was home today with a head cold/virus and just ran out of energy after parkerizing/assembling. I'll get around to switching them around sooner or later.

Person I bought it from also included a nice pair of LEAD jaw inserts, just some big, clunky V-shaped pieces that look like they were commercially made. Found someone on eBay who makes custom-fit aluminum v-channel pieces too and will order some of them soon.

Thanks for the tips, hints, suggestions. Wilton is what I wanted, just not at $500.

I'm sure my grandchildren will get some use out of this someday too.
 
#27
Re: Bench vise suggestions, recommendations

I actually managed to score a Wilton for a good price a couple years back. I've used it more than I expected including some AR-15 and AR-10 projects. I don't count as a gunsmith by a long shot bu it's true about buying good tools: you only have to buy them once and if you need to pass them along they hold their value.

I don't want to derail the thread but there's something I've been wondering. Is a good bench vice with proper jaws is generally sufficient to change a barrel on a custom bolt gun. I understand factory actions may require more persuasive methods to remove the original barrel. However if one were to have a nice custom built could he use a Wilton to safely do barrel changes between two or three barrels that have been previously fit and torqued by a competent smith?
 
#28
Re: Bench vise suggestions, recommendations

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mkmckinley</div><div class="ubbcode-body">I actually managed to score a Wilton for a good price a couple years back. I've used it more than I expected including some AR-15 and AR-10 projects. I don't count as a gunsmith by a long shot bu it's true about buying good tools: you only have to buy them once and if you need to pass them along they hold their value.

I don't want to derail the thread but there's something I've been wondering. Is a good bench vice with proper jaws is generally sufficient to change a barrel on a custom bolt gun. I understand factory actions may require more persuasive methods to remove the original barrel. However if one were to have a nice custom built could he use a Wilton to safely do barrel changes between two or three barrels that have been previously fit and torqued by a competent smith?</div></div>

I havent' ever used a bench-mounted vise for barrel changes, but a friend of mine uses his for this in his shop.

What I HAVE done in the past while building FN-FALs is mount a barrel vise in the middle of a four foot length of 2x6 pressure-treated lumber. With the barrel clamped down, and a 4-foot length of steel pipe placed on a breaker bar inserted in a receiver clamp, I'd STAND on the board and torque up the barrel (shaving it where necessary to get it to line up).

I should have taken pictures.

YMMV.
 
#29
Re: Bench vise suggestions, recommendations

My dad sold me a Wilton 6" he had in the garage. $135 got a more vise then I needed, but it is old, quality, and made in America. He even threw in some new jaws he had ordered. Not two weeks later I found a Comlumbian 3" model buried at a yard sale which I picked up for $10. These things will still be around with the cockroaches when the world ends.
 
You must log in or register to reply here.

Similar threads

vicroll91
Accessories Barrel vise, AG Schmedium, R700 Action Wrench, Sling
Replies
4
Views
700
vicroll91
vicroll91
PatMiles
An Indiana school apparently banned the American flag…but the kids fought back!
Replies
8
Views
2K
The D
The D
F
Ragnarok Sniper Challenge AAR
Replies
1
Views
629
FatBoy
F
S
Real World Sniper Challenge AAR
Replies
6
Views
945
308pirate
308pirate
F
2024 Legion Memorial Run and Gun, Honoring the Fallen as a Family
Replies
13
Views
771
FatBoy
F
Top Bottom
Back
Home
Forums
Merch
Alerts