Just got a B14r and the balance point is almost all the way to the rear of the rifle. Any ideas on how to mitigate this other than throwing it in a chassis?
Thanks
Thanks
Bergara B14r Balance
- Thread starter Poirierpro
- Start date
Carbon barrel or steel barrel?
Weighted arca rail from Area 419.
Shave down the fore-end barrel channel and line it with lead/epoxy for weight?
Weighted arca rail from Area 419.
Shave down the fore-end barrel channel and line it with lead/epoxy for weight?
I highly recommend you replace the bolt knob with an EGW. sku: 36031
It is the same as a Vudoo except for the internal thread size. It fits the B14R and the CZ457. I liked the AREA 419 knob but the EGW is even more comfortable.
Good luck
It is the same as a Vudoo except for the internal thread size. It fits the B14R and the CZ457. I liked the AREA 419 knob but the EGW is even more comfortable.
Good luck
Get a weighted arca rail from area419, you can pay extra and make them make the rail itself in steel inside of aluminum, then all the brass weights.
I'm not sure, it was a special order from Manners when I had one done for the Manners. I think it was an additiona $50-100 for a steel version of the rail instead of the alu one, but I'm not 100% sure.
Get a couple of these weights and try them on the stock in place of the fillers. https://kineticresearchgroup.com/product/lop-spacer-heavy/
It’s stock heavy already. I put on a Harris bipod and that alone helped a ton. Balance point now is just in front of the mag.
It’s nice when it’s a easy fix and a useful item to add the weightIt’s stock heavy already. I put on a Harris bipod and that alone helped a ton. Balance point now is just in front of the mag.
It’s stock heavy already. I put on a Harris bipod and that alone helped a ton. Balance point now is just in front of the mag.
When you decide to upgrade to ARCA - https://www.area419.com/product/universal-weight-tunable-arcalock-rail-and-kits/
