I have some moly coated bullets loaded that I want to use as plinkers/range fodder. What is the best way to clean the barrel afterwards so I can go back to naked bullets?
Best solvent removing moly from barrel
- Thread starter rocky_lange
- Start date
Re: Best solvent removing moly from barrel
I'll say up front I've never used moly and dont intend to. Its biggest drawback is how hard it is to remove after you are no longer a fan. IMO you should give it to a moly loving friend and buy yourself cheap range fodder.
okie
I'll say up front I've never used moly and dont intend to. Its biggest drawback is how hard it is to remove after you are no longer a fan. IMO you should give it to a moly loving friend and buy yourself cheap range fodder.
okie
Re: Best solvent removing moly from barrel
Unfortunately, it is already loaded for a .308 I no longer have.
If there are any Moly fans in Bham, I will gladly trade. I just don't personally know a lot of the shooters in the area.
Unfortunately, it is already loaded for a .308 I no longer have.
If there are any Moly fans in Bham, I will gladly trade. I just don't personally know a lot of the shooters in the area.
Re: Best solvent removing moly from barrel
Kroil.
http://www.midwayusa.com/viewproduct/?pr...isting-_-137203 ...read the reviews
Kroil.
http://www.midwayusa.com/viewproduct/?pr...isting-_-137203 ...read the reviews
Re: Best solvent removing moly from barrel
Mobil One Synthetic 5w20 or Mother Mag Aluminum Mag polish.
both used together will get you clean.
Terry
Mobil One Synthetic 5w20 or Mother Mag Aluminum Mag polish.
both used together will get you clean.
Terry
Re: Best solvent removing moly from barrel
Kroil....I used a couple saturations and let it soak then brush it. As long as you don't let it build up'you are good. If you get the doughnut after the chamber I never found anything to get it out. I would pull them and toss them if it were me or coat the bore first with liquid moly on a patch to prevent layering. That's my experience with it.
Kroil....I used a couple saturations and let it soak then brush it. As long as you don't let it build up'you are good. If you get the doughnut after the chamber I never found anything to get it out. I would pull them and toss them if it were me or coat the bore first with liquid moly on a patch to prevent layering. That's my experience with it.
Re: Best solvent removing moly from barrel
I have been told that "Ed's Red" does an awesome job on moly clean.
Here is the link
http://www.lasc.us/EdsRedBoreCleaner.htm
I have been told that "Ed's Red" does an awesome job on moly clean.
Here is the link
http://www.lasc.us/EdsRedBoreCleaner.htm
Re: Best solvent removing moly from barrel
I use Kroil for about everything, I mix it with CLP for certain applications.
Anyone checked out the Kroil MSDS?
Scary...
I use Kroil for about everything, I mix it with CLP for certain applications.
Anyone checked out the Kroil MSDS?
Scary...
Re: Best solvent removing moly from barrel
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sr-WiNdTeCh</div><div class="ubbcode-body">I use Kroil for about everything, I mix it with CLP for certain applications.
Anyone checked out the Kroil MSDS?
Scary... </div></div>
That is why I use Ed's Red that and price, they say it works as well or better then Kroil. I have never used the Kroil but the MSDS has High carcinogens in it. Not to say you want to take a bathe in ER's but I would rather have it on me then Kroil
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Sr-WiNdTeCh</div><div class="ubbcode-body">I use Kroil for about everything, I mix it with CLP for certain applications.
Anyone checked out the Kroil MSDS?
Scary... </div></div>
That is why I use Ed's Red that and price, they say it works as well or better then Kroil. I have never used the Kroil but the MSDS has High carcinogens in it. Not to say you want to take a bathe in ER's but I would rather have it on me then Kroil
Similar threads
