Gunsmithing Broken Shell Extractor

[Pat M]

Need a 300wm broken shell extractor, i want one to take to match with gun (had a case 1/2 - cost me a lot of points)

I have a slow removal / home made kit, but am trying to find Echo or similar

 

[Victor N TN]

Re: Broken Shell Extractor

If you find one let me know. I would like to have one on hand myself.

 

[RTH1800]

Re: Broken Shell Extractor

I still see a few of the old Marble's broken shell removers at gun shows. Keep in mind that they have two parts. One is the head and the other is the collet. They can be changed out. The head determins case fit in bolt and length. The collets determine cal. So you can fine one for the correct bolt face and length and another for the correct cal and switch them out. ie. 250 Savage and 30-06 and make one for 300 Sav and or 25-06. Hope this helps

 

[Pat M]

Re: Broken Shell Extractor

figure i can take a 30-06 and monkey the back end. ? something closer ?

? ones i can find, 308, 30-06, 7.62x54R ......

 

[Pat M]

Re: Broken Shell Extractor

Bump