How do you reset turret to zero un Bushnell Elite 4200? I have tried to losen the small knurled knob on turret with no avail? any help would be great.
Rifle Scopes Bushnell Elite 4200 turret reset
- Thread starter johnnyo317
- Start date
Re: Bushnell Elite 4200 turret reset
Yep u have to loosen it up enough that when you pull up you kinda take
"It out of gear"
Yep u have to loosen it up enough that when you pull up you kinda take
"It out of gear"
Re: Bushnell Elite 4200 turret reset
I have put a pair of pliers on it and cant get it to losen up.
I have put a pair of pliers on it and cant get it to losen up.
Re: Bushnell Elite 4200 turret reset
What are you using the pliers on? The turret or the silver locking knob? There should be a hole for the allen wrench at the top to unscrew the knob and then you pull straight up on the turret.
Page 7 in the manual.
http://www.bushnell.com/manuals/riflescopes/Elite%20Tactical%20RS%205LIM_WEB.pdf
Page 5 for a non tactical model
http://www.bushnell.com/manuals/riflescopes/Elite_Riflescope_Manual.pdf
What are you using the pliers on? The turret or the silver locking knob? There should be a hole for the allen wrench at the top to unscrew the knob and then you pull straight up on the turret.
Page 7 in the manual.
http://www.bushnell.com/manuals/riflescopes/Elite%20Tactical%20RS%205LIM_WEB.pdf
Page 5 for a non tactical model
http://www.bushnell.com/manuals/riflescopes/Elite_Riflescope_Manual.pdf
Re: Bushnell Elite 4200 turret reset
First what scope do you have? Does it even have re-settable zero turrets? Not all 4200 scopes have re-settable zero turrets, only the tactical models. Which makes me wonder, if you have a "small, knurled" knob on top, it doesn't sound like a tactical scope. Sounds like one of the 6-24 hunter models with semi-target turrets.
First what scope do you have? Does it even have re-settable zero turrets? Not all 4200 scopes have re-settable zero turrets, only the tactical models. Which makes me wonder, if you have a "small, knurled" knob on top, it doesn't sound like a tactical scope. Sounds like one of the 6-24 hunter models with semi-target turrets.
I'm bumping an old topic, because searching brought me here. All you can do, is set the knob back to zero correct? There is no way to make the knob cover the "10 MOA" Mark's under it ? I hope what I'm asking even makes sense lol
Those marks indicate how many revolutions you've dialed, so no, there's no way to make the turret fully cover them. I just used a marker or paint pen to put a mark in the vertical line to show where my zero was when I ran one.
Yeah, that's kind of what I was thinking, but still wasn't 100% sure. It is sitting on the 3rd line now. This scope only has 44 moa of total adjustment. So I'm not real sure how far I can dial up now.
