Can I get something like this for a Rockchucker?

[TDH]

http://www.midwayusa.com/viewProduct/?productNumber=277407

I'd like to just be able to pull the pushing to change dies, but I can't find anything. I know the press bushing unscrews, but even if I type in the RCBS part number for the bushing I can't find them anywhere.

 

[doc76251]

Re: Can I get something like this for a Rockchucker?

You need to know if your Rock Chucker has the adapter for the 7/8 x 14 TPI dies in place. If it does you can unscrew it and screw in the Hornady Lock-n-Load bushing and carry on smartly. If not you will need a new press that has the 1 1/4 - 10 TPI opening with an adapter for standard dies.

Cheers,

Doc

 

[TDH]

Re: Can I get something like this for a Rockchucker?

I'll have to take it down and look at it. It's a recent production Rockchucker Supreme from Bass Pro. It was purchased in December.

 

[doc76251]

Re: Can I get something like this for a Rockchucker?

If it's this one

http://www.sinclairintl.com/images/uploads/6821_7777_large.jpg

Unscrew the black "nut" on top and the Hornady bushing will screw in place of it.

Cheers,

Doc

 

[TDH]

Re: Can I get something like this for a Rockchucker?

Thanks Doc. I just ordered the Hornady bushing conversion kit with the inserts.