Cheek Risers for a LOT of cheek rising.

F

firestorm1284

Sergeant
Full Member
Minuteman
Jun 19, 2010
286
0
40
Wisconsin
#1
Hey guys, I've been looking around on the forum a bit for a good cheek riser. I have a Howa 1500 with a B&C Medalist stock. My cheek weld is more of a "chin" weld. I folded up a mouse pad, and figure I need at least 3/4" of cheek rise to get a proper weld. Most of the strap on cheek risers don't seem like they would provide nearly enough lift. The two I have seen are the Karsten and the XLR. Which of the two would you recommend? Are there any other good options?

I don't mind drilling some holes in my stock, IF the product is going to work well. Thanks!
 
#3
Re: Cheek Risers for a LOT of cheek rising.

Do Karsten's. Get the Allen head set screws. The thumb screws tend to loosen more quickly. Wish someone on the Site would make available some Nylok screws for those common bolts/screws! JMHO
 
#4
Re: Cheek Risers for a LOT of cheek rising.

XLR looks good, but I don't know any mounting stuff that keeps it steady from what I heard (because the holes are too close to each other)
 
#5
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: former naval person</div><div class="ubbcode-body">Wish someone on the Site would make available some Nylok screws for those common bolts/screws! JMHO
</div></div>

Agree..
 
#8
Re: Cheek Risers for a LOT of cheek rising.

Hmm, but I thought they solved that issue by using those spacers? I know the group buy didn't go through, but I think I could make something up on my lathe.
 
#9
Re: Cheek Risers for a LOT of cheek rising.

Firestorm, you are correct. The threaded inserts will eliminate any movement as it allows you to clamp to something solid instead of the plastic/fiberglass. If you have a lathe, this will be no problem for you. PM me if you have any questions.

-Kyle ~ XLR Industries
 
#10
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: XLR</div><div class="ubbcode-body">Firestorm, you are correct. The threaded inserts will eliminate any movement as it allows you to clamp to something solid instead of the plastic/fiberglass. If you have a lathe, this will be no problem for you. PM me if you have any questions.

-Kyle ~ XLR Industries </div></div>

Probably setting myself up for a 'No' but... it would be great to have the XLR with the threaded inserts as a package and a little more 'molded' to suit the narrow combs of rifles. As it is, it's a little too rounded up top and moves the face to the left of the reticle somewhat (for those of us with wide faces/cheekbones). I know, very picky and 'want my cake'...
 
#11
Re: Cheek Risers for a LOT of cheek rising.

I hadn't heard that about the width. I have a B&C Tactical stock (basically a McMillan knockoff) that has a fairly wide buttstock, will the XLR work well for that?

Kyle, I sent you an email earlier today about possibly purchasing one of your cheek risers. Did you get it?
 
#12
Re: Cheek Risers for a LOT of cheek rising.

Oh, and I second the idea (probably more like 100th the idea) of having the XLR come with hardware if at all possible.

It was my understanding that the reason it didn't come with any is because they are designed for the XLR chassis, and not for other rifles. However, I think there might be a lot of demand for them if they came with mounting hardware.
 
#13
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: firestorm1284</div><div class="ubbcode-body">Oh, and I second the idea (probably more like 100th the idea) of having the XLR come with hardware if at all possible.

It was my understanding that the reason it didn't come with any is because they are designed for the XLR chassis, and not for other rifles. However, I think there might be a lot of demand for them if they came with mounting hardware. </div></div>

He'll yeah they would!

I wish I had access to a lathe. I wouldn't been know where to begin, nor do I know of anyone with one
 
#15
Re: Cheek Risers for a LOT of cheek rising.

I will see what we can do to offer a compete package for you guys.

I do have a couple of different mandrels available for different width cheek rests. I think I can do from 1.5-1.6 inch inside widths. The cheek rests will stay round as that is what my brake is set up for.

Thanks, Kyle ~ XLR Industries
 
#16
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: wtmgdh</div><div class="ubbcode-body">XLR, what bipod is that?

</div></div>
That bipod is made by LR Accuracy. It retails for $450. We are a dealer for them if you are interested.

Thanks, Kyle ~ XLR Industries
 
#17
Re: Cheek Risers for a LOT of cheek rising.

i just added a karsten model B to my HS stock. 3/8" holes on one side, 1/4" on the other. had to trim the bolts about three threads, but its tight and secure. check placement so you can take your bolt out without having to take it off. but i too went from chin to cheek weld with this addition.
 
#18
Re: Cheek Risers for a LOT of cheek rising.

Just got back from shooting my 300. Kyle your cheekrest rocks.

IMG_0326.jpg


For those of you with scopes that have a picky occular (like the original Razor), being lined up *exactly* behind the scope is mandatory. This rest allows almost as much adjustment as you'd ever want (between long slots in the rest, and the ability to put holes in the stock where *you* choose). This has been the ONLY way so far I have been able to get a SOLID cheek weld that is high enough for me.

John
 
#19
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: XLR</div><div class="ubbcode-body">I will see what we can do to offer a compete package for you guys.

Thanks, Kyle ~ XLR Industries </div></div>

This would be sweet and I think that several folks would jump all over it..
 
#20
Re: Cheek Risers for a LOT of cheek rising.

Jrob - did you put threaded inserts in your stock? If so, did you buy them somewhere or make them yourself?

That is my only concern about this rest. I LOVE the design, and the fact that it is aluminum. I just don't know if I want to hassle with making my own hardware.
 
#22
Re: Cheek Risers for a LOT of cheek rising.

You could go with something like this .

It's a little expensive, but you don't have to drill holes in your stock. It has a 1.5 inch foam riser, but I think that could be cut down some to make it fit right.

They also have this one for a magazine, but it shows the riser better and the 'hidden' range/dope card holder.
 
#23
Re: Cheek Risers for a LOT of cheek rising.

If your scope is so high that you have a chin weld, your rings are too high. Not saying you won't still need a check rest of some sort, but go with as low a rings as possible.
 
#24
Re: Cheek Risers for a LOT of cheek rising.

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Notso</div><div class="ubbcode-body">If your scope is so high that you have a chin weld, your rings are too high. Not saying you won't still need a check rest of some sort, but go with as low a rings as possible. </div></div>

Yes... lower rings are generally better, but not always the problem. You can have the lowest rings available and still run into issues.

Example: Install 40 MOA base on rifle. Add one (1) Vortex Razor with sunshade (remember, just going from a 30mm to a 35 mm scope raises your eye 2.5mm or .100"). Place scope in the absolute lowest rings that will still allow a Butler Creek cap to *just* miss the barrel with the bottom ground off and the ocular will *still* be jacked WAY up just like you used too tall rings.

John
 
#25
Re: Cheek Risers for a LOT of cheek rising.

I am actually using "Low" rings. My bolts just BARELY clears my scope. I don't think my 20 MOA scope base is helping matters.

I like the looks of that cheek riser, but I always worry about those that attach by way of straps. Do they shift around? Is the cheek weld repeatable?
 
#26
Re: Cheek Risers for a LOT of cheek rising.

I have a stock pack without a riser, and the straps are tight and don't wiggle at all. Now I only hunt the not-so-illusive paper targets, and that's from a bench or prone, so I don't do a lot of the positional stuff. A lot of people use the stock packs and I don't recall anyone ever having a problem with theirs coming loose. My cheek weld is still a little low with mine, and I am thinking about getting that one in the link, and then just trimming it down to where I need it.
 
#29
Re: Cheek Risers for a LOT of cheek rising.

I tried one. Cut down a couple roll pins to use as bushings through the stock, was able to tighten the carriage bolts real well. Prolly order a few more for my HS stocks. Might try to build up some threaded bushings next time so i don't need to use carriage bolts.

2011-05-13_22-02-49_302.jpg


2011-05-13_22-02-25_565.jpg
 
#30
Re: Cheek Risers for a LOT of cheek rising.

It took awhile to get here, but I got the XLR, and it is NICE!! Well worth the 25 bucks IMO. The only 2 caveats I have are the aforementioned close bolt spacing, and the width (it was just a bit too narrow for my stock, but I was able to bend it enough).

My lathe is down right now, I'm waiting on some parts from Grizzly, and I just couldn't wait. I decided to scrap the screws that came with it, and use some 1/4"-20 finish bolts. I found that an old aluminum arrow I had PERFECTLY fit the bolts. I cut it down to length, drilled holes in the stock and slid the aluminum inserts in. Then I put the check rest over it and put the bolts through. I got some plastic knobs, but because of the close bolt spacing they hit each other. I got some smaller knobs, and now its beautiful! I can tighten them as much as I want without crushing the stock, and the cheek rest is ROCK solid. I love this thing!

DSC_0163.jpg


DSC_0168.jpg


DSC_0174.jpg


DSC_0175.jpg
 
You must log in or register to reply here.

Similar threads

G
Fixed Length adjustable cheek riser stock recommendations anyone?
Replies
5
Views
567
sam4886
sam4886
Gbear19
Looking For "universal" cheek riser Recommendations
Replies
17
Views
1K
Elite_KG
E
9
Low cost chassis options
Replies
120
Views
4K
Dead Eye Dick
Dead Eye Dick
Mark_Dorman
MDT Field Stock for the 10/22
Replies
3
Views
1K
Mark_Dorman
Mark_Dorman
sheepdog697
Tikka UPR aftermarket cheek piece
Replies
2
Views
935
sheepdog697
sheepdog697
Top Bottom
Back
Home
Forums
Merch
Alerts