Did a surch and came up with nothing. Is there anyone doing this. Would it be better to modify a 308 or 223 mag. Thanks.
Gunsmithing converting AICS mags for 6mmbr feeding
- Thread starter oldreliable45120
- Start date
Re: converting AICS mags for 6mmbr feeding
I have that article already. Didn't go into too much info on mag work. I have a 1-14 twist and shoot 68 grainers and have a shorter OAL.
I have that article already. Didn't go into too much info on mag work. I have a 1-14 twist and shoot 68 grainers and have a shorter OAL.
Re: converting AICS mags for 6mmbr feeding
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oldreliable45120</div><div class="ubbcode-body">I have that article already. Didn't go into too much info on mag work. I have a 1-14 twist and shoot 68 grainers and have a shorter OAL. </div></div>
Like in the article this will only work with long heavy bullets seated out. If you try and use light weight bullets seated to specs they will not feed from the mag. The feed lips of the mag will drop the case before the bullet tip will start into the chamber.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: oldreliable45120</div><div class="ubbcode-body">I have that article already. Didn't go into too much info on mag work. I have a 1-14 twist and shoot 68 grainers and have a shorter OAL. </div></div>
Like in the article this will only work with long heavy bullets seated out. If you try and use light weight bullets seated to specs they will not feed from the mag. The feed lips of the mag will drop the case before the bullet tip will start into the chamber.
