CZ 452 bolt problem

[lilhank]

Bought a new 452 American the other day and took it down a cerakoted it,put it back together today and went to go shoot it.It would pick the first round out of the magazine and chamber it.After I fired it and went to cycle the round the bolt would slide completely out.What would be causing this problem.
Thanks,
Jason

 

[bunsen27]

Re: CZ 452 bolt problem

I believe to remove the bolt you need to depress the trigger. It sounds like something is not resetting properly in the TG (sear possibly?). I know my Browning T-bolt was having the same issue after I had done some polishing work and failed to fully remove all the polishing compound. Hope that helps point you in the right direction.

 

[Gregch44]

Re: CZ 452 bolt problem

Maybe there is a bit of cerakote binding the trigger from returning forward. If the trigger does not return forward the bolt will come right out as you have to pull the trigger for bolt removal.

 

[clintb]

Re: CZ 452 bolt problem

That is a strange one...... I have polished both of my 452 with no problems.
I can't see how it would fire if the trigger and sear were that far out of wack
I'll have to go out and check that one out tonight