Gunsmithing Devcon plastic steel
- Thread starter mdmp5
- Start date
Re: Devcon plastic steel
Brownell's has it for about $25.00/lb I've been using the steel putty for about 15 years. Good stuff. They also make a stainless steel version. Go to a machine supply store like Grainger's.
Brownell's has it for about $25.00/lb I've been using the steel putty for about 15 years. Good stuff. They also make a stainless steel version. Go to a machine supply store like Grainger's.
Re: Devcon plastic steel
It must have been a while since you bought any from Brownell's. Last I bought was $37.
It must have been a while since you bought any from Brownell's. Last I bought was $37.
Re: Devcon plastic steel
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg264</div><div class="ubbcode-body">It must have been a while since you bought any from Brownell's. Last I bought was $37. </div></div>
^ this.....just bought some 2 weeks ago from Brownells
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg264</div><div class="ubbcode-body">It must have been a while since you bought any from Brownell's. Last I bought was $37. </div></div>
^ this.....just bought some 2 weeks ago from Brownells
Re: Devcon plastic steel
yeah its like $37 per box now. I ordered my first box a couple weeks ago after reading a bunch of the bedding post on here. Gotta say I will never go back to acraglass gel for bedding rifles. It does cost 2x as much as acraglass Gel though.
yeah its like $37 per box now. I ordered my first box a couple weeks ago after reading a bunch of the bedding post on here. Gotta say I will never go back to acraglass gel for bedding rifles. It does cost 2x as much as acraglass Gel though.
Re: Devcon plastic steel
just found some for 32.73 free shipping
http://www.markingpendepot.com/index.asp?PageAction=VIEWPROD&ProdID=182
just found some for 32.73 free shipping
http://www.markingpendepot.com/index.asp?PageAction=VIEWPROD&ProdID=182
Re: Devcon plastic steel
Here's a smaller package http://www.midwayusa.com/viewProduct/?productnumber=970250
Here's a smaller package http://www.midwayusa.com/viewProduct/?productnumber=970250
Re: Devcon plastic steel
i asked about the smaller tubes, i know its enough for stock texturing, but is it enough to bed? i guess you could get two (four) tubes. or use this stuff ?? about the same price
http://www.midwayusa.com/viewProduct/?productNumber=321274
i asked about the smaller tubes, i know its enough for stock texturing, but is it enough to bed? i guess you could get two (four) tubes. or use this stuff ?? about the same price
http://www.midwayusa.com/viewProduct/?productNumber=321274
Re: Devcon plastic steel
I pay $64 a lb for Devcon Titanium Putty. It cures 50% harder than the Steel putty.
I pay $64 a lb for Devcon Titanium Putty. It cures 50% harder than the Steel putty.
Re: Devcon plastic steel
I bought some Devcon 10110 from contestbaby09 on ebay that worked out well.
I see he now has Devcon 10110 Plastic Steel Putty (A) 1lb listed now for 25.99 plus shipping.
If you buy more the price gets cheaper.
PM me if you have questions.
If you are wondering, I am not in any way associated with him.
Good shooting
Ron
I bought some Devcon 10110 from contestbaby09 on ebay that worked out well.
I see he now has Devcon 10110 Plastic Steel Putty (A) 1lb listed now for 25.99 plus shipping.
If you buy more the price gets cheaper.
PM me if you have questions.
If you are wondering, I am not in any way associated with him.
Good shooting
Ron
Re: Devcon plastic steel
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body">Where do you get Devcon Titanium for $64 lb? </div></div>
Industrial 1 Supply in Columbus, GA. A little hole in the wall place on 10th avenue across the street from Graingers.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Skunkworks</div><div class="ubbcode-body">Where do you get Devcon Titanium for $64 lb? </div></div>
Industrial 1 Supply in Columbus, GA. A little hole in the wall place on 10th avenue across the street from Graingers.
