Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Shot my dpms sass this weekend and the pmag ran just fine - have a good friend with another sass that uses pmags and he hasn't reported any problems either - both are 308...
I shot my DPMS many times and the pmags enter and eject just fine... Maybe the mag release bar on the left side of your lower that pops out when you push the mag release button is screwed in to tight... Try pushing the mag release button is as far as you can to where the bar comes out far enough to unscrew it one revolution.
It's just the Pmags. They are wicked tight long before they get to the mag release. No problem in any of the armalite lowers I have. They work in another DPMS lower just one giving me issues.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Zebra308</div><div class="ubbcode-body">My DPMS LR-308 runs like a top with the P-Mags no issues. </div></div>
Same here... i have had C-Products mags be too tight but never pmags.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mick265</div><div class="ubbcode-body">They work in another DPMS lower just one giving me issues. </div></div>
Mine runs like a champ, no issues at all. It sounds like you have an issue in that lower, don't go trimming magazines until you start looking through the lower's potential issues first.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: jawa</div><div class="ubbcode-body">I shot my DPMS many times and the pmags enter and eject just fine... Maybe the mag release bar on the left side of your lower that pops out when you push the mag release button is screwed in to tight... Try pushing the mag release button is as far as you can to where the bar comes out far enough to unscrew it one revolution. </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: mick265</div><div class="ubbcode-body">It's just the Pmags. They are wicked tight long before they get to the mag release. No problem in any of the armalite lowers I have. They work in another DPMS lower just one giving me issues.
Mick </div></div>
Not the original topic of the thread, but does your armalite lower function with a Pmag? If it does, that would be the first one I ever heard of.
Pmags are the most popular mag seen at any 3gun match that i have ever been to. I did have a pof rifle that was a little snug. I would measure the mag and mag well and then some other ar15s mag wells. All the rest of my ar rifles work just fine with Pmags.