Rifle Scopes Elevation Adjustment Range on 1" Tubes

Ishallbie O'Cullkillin

Ishallbie O'Cullkillin

Central Coastranger
Full Member
Minuteman
Nov 18, 2007
445
4
57
Oregon
#1
I have one AR15, a 6.5 Grendel that requires more elevation adjustment than what the Burris 30mm can achieve at 950yds. I am looking at one piece scope mounts with 20moa built in, but can only find 1" scope tube mounts of this type. Do all 1" tubes have more or less the same amount of elevation adjustment range?
 
#4
Re: Elevation Adjustment Range on 1" Tubes

LaRue LT107 mount has 30moa built in. It is a little high for a bolt gun, but should be just right for an AR platform.
 
#9
Re: Elevation Adjustment Range on 1" Tubes

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: SWFA</div><div class="ubbcode-body">I wish the AADMOUNT in 30mm was out already!!</div></div>
Tell me about it!

Sorry folks, we did have a slight delay at one of our suppliers which pushed the 30mm model back a couple weeks. We're now looking at about 7.5 weeks until they're in stock.

This batch of 30mm models will be longer so they'll fit USO T-Pals, they'll have a matte finish and a <span style="font-weight: bold">lower price</span>, so good things will come to those who can wait.
 
#11
Re: Elevation Adjustment Range on 1" Tubes

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">Can they (34mm) handle the larger turrets like the T-Pal or the Premeir? </div></div>
Ditto?
 
#12
Re: Elevation Adjustment Range on 1" Tubes


DSC00128.JPG


IMG_1943.jpg


http://www.aadmount.com/
 
#14
Re: Elevation Adjustment Range on 1" Tubes

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Chiller</div><div class="ubbcode-body">Can they (34mm) handle the larger turrets like the T-Pal or the Premeir? </div></div>
Not T-Pal, but everything else I know of. Without making the ring sections really skinny (which would have gone against design intent) I couldn't make it fit both the T-Pals and S&B PMII's with illumination. I figured in the 34mm size, many more customers will want to fit S&B.

But in 30mm, that problem didn't exist so I made them longer.
 
#17
Re: Elevation Adjustment Range on 1" Tubes

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Lowlight</div><div class="ubbcode-body">Nightforce Uni Mount is what you want... 30mm with 20MOA built in. Others are on the horizon. </div></div> Ok, I'm about to buy the Unimount. Is the ultra high model tall enough for an AR platform? Is enough clearance for a low profile BUIS to much to hope for?
 
#20
Re: Elevation Adjustment Range on 1" Tubes

Thanks Gavin S. What I'm looking for is that magic distance where I have a good cheekweld without tilting my head, while also having enough clearance under the eyepiece to accommodate a folding iron sight. My rear folding sight sits about .485" above the rail surface, and the current mount puts the bottom of the scope tube approximately .9" over the rail surface, giving a generous .135" of ocular end clearance over the folding sight. The higher the better I guess.
 
You must log in or register to reply here.

Similar threads

c3guns
Can't get scope to zero low enough with 20MOA rail
Replies
16
Views
867
6.5SH
6
C
Rifle Scopes Vertical adjustment after zeroing
Replies
5
Views
722
Caba
C
C
Rifle Scopes Brand NEW, Just in Delta Optical Stryker 1-10X28 and 3.5-21X44 Authorized Dealer and Warranty Station darnfineshot.com 812-917-5653
Replies
1
Views
287
Maurygold
M
Artisan
Rifle Scopes ATACR 7–35 Made in Japan vs. USA – Material difference, stripped set screw, mount issue, MK5HD comparison
Replies
8
Views
458
Night Vision Viking
Night Vision Viking
gr8fuldoug
Rifle Scopes Nightforce Scope Savings
Replies
0
Views
289
gr8fuldoug
gr8fuldoug
Top Bottom
Back
Home
Forums
Merch
Alerts