I got a Gentleman Jim Thursday and I have already had to tighten the blade pivot screw several times. Is there a fix for this or am I going to have to keep doing this? I really like the knife and I have already ordered a CQC 7 v grind so any info would be great.
Sidearms & Scatterguns Emerson Blade Play
- Thread starter Nosler243Shooter
- Start date
Re: Emerson Blade Play
How hard is the knife to reassemble when you take the pivot screw out? Is there anything that is going to fall out?
How hard is the knife to reassemble when you take the pivot screw out? Is there anything that is going to fall out?
Re: Emerson Blade Play
No.. they are pretty simple knives.. use the right driver tip for the screw.. I've buggered a few up over time.
If it's new.. go ahead and clean off all the factory goop and reassemble. Let it break-in clean.. then ad some graphite or oil of choice if you desire later.
No.. they are pretty simple knives.. use the right driver tip for the screw.. I've buggered a few up over time.
If it's new.. go ahead and clean off all the factory goop and reassemble. Let it break-in clean.. then ad some graphite or oil of choice if you desire later.
Re: Emerson Blade Play
Just turn the slot screw out. The female part is what the blade pivots on, so it won't fall apart on you.
Just turn the slot screw out. The female part is what the blade pivots on, so it won't fall apart on you.
Re: Emerson Blade Play
What the rest of the guys added in. It's real easy to do and don't worry about losing any tiny parts inside. One thing I did though knowing that once the Loctite cured it wasn't going anywhere, was I marked exactly where I wanted the screw at for the proper tension. Disassembled, drop of red Loctite on the thread, reassembled to right where I marked it at. Was flawless for the next four years of EDC until I retired it a few months ago.
What the rest of the guys added in. It's real easy to do and don't worry about losing any tiny parts inside. One thing I did though knowing that once the Loctite cured it wasn't going anywhere, was I marked exactly where I wanted the screw at for the proper tension. Disassembled, drop of red Loctite on the thread, reassembled to right where I marked it at. Was flawless for the next four years of EDC until I retired it a few months ago.
Re: Emerson Blade Play
had a bunch of emersons and havn't had any issues with main screw becoming loose..
They are easy to take apart and very simple.
I would clean the factory grease off and relube with Mobile one synthetic and then bake together and if you continue to see the screw becoming loose again I would use a TINY drop of loctite on the screw threads as long as the screw threads were clean of any oil.
Have fun with the Emerson....They are top knotch in my book.
....SmokeRolls
had a bunch of emersons and havn't had any issues with main screw becoming loose..
They are easy to take apart and very simple.
I would clean the factory grease off and relube with Mobile one synthetic and then bake together and if you continue to see the screw becoming loose again I would use a TINY drop of loctite on the screw threads as long as the screw threads were clean of any oil.
Have fun with the Emerson....They are top knotch in my book.
....SmokeRolls
Re: Emerson Blade Play
Thanks for the replies. If I use the locktite do I need to use red or blue?
Thanks for the replies. If I use the locktite do I need to use red or blue?
