Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
GunsmithingFinishing an LMT/Knights/Armalite-A 80 jig recommendations.
I cannot find a jig or a drawing to finish my lower. I cannot find a jig anywhere, and have been told a DPMS jig cannot be used. Anyone have any ideas?
I would check out these guys. They sell Knights style lowers, as well as this jig so it might work. Out of stock like everything else, but worth a call.
I would check out these guys. They sell Knights style lowers, as well as this jig so it might work. Out of stock like everything else, but worth a call.
If you're doing 1-2 the drill press jigs do work although the pocket isn't really pretty. It's also a strain on the spindle of your drill press. If you're doing more than 1-2 I'd say go with this setup. The results I've seen have been really nice.
If you're doing 1-2 the drill press jigs do work although the pocket isn't really pretty. It's also a strain on the spindle of your drill press. If you're doing more than 1-2 I'd say go with this setup. The results I've seen have been really nice.
No problem, Its literally impossible to find a jig, and after genesisCNC shut down and stole $275 from me (never sent me product, and website is down).....I'm not sure what to do.
What are the chances you can mod your jig a bit? What does it reference off of and is it armalite compatible? If the alignment is correct I would consider clearancing an LR308 jig. I was able to do such on with my BTR jig with EP80 9mm lower.
What are the chances you can mod your jig a bit? What does it reference off of and is it armalite compatible? If the alignment is correct I would consider clearancing an LR308 jig. I was able to do such on with my BTR jig with EP80 9mm lower.