Flash hole uniforming/ deburring???
- Thread starter SuperXJeff
- Start date
-
- Tags
- deburring flash hole uniforming or
Re: Flash hole uniforming/ deburring???
Lyman.
It indexes off of the case mouth so you have to make sure flash hole deburring is the last operation.
I have been thinking about the RCBS unit because it indexes off the inside of the case head.
Lyman.
It indexes off of the case mouth so you have to make sure flash hole deburring is the last operation.
I have been thinking about the RCBS unit because it indexes off the inside of the case head.
Re: Flash hole uniforming/ deburring???
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">It indexes off of the case mouth so you have to make sure flash hole deburring is the last operation.</div></div>
+1, case length needs to be consistant on the Sinclair style.
<div class="ubbcode-block"><div class="ubbcode-header">Quote:</div><div class="ubbcode-body">It indexes off of the case mouth so you have to make sure flash hole deburring is the last operation.</div></div>
+1, case length needs to be consistant on the Sinclair style.
Re: Flash hole uniforming/ deburring???
<span style="font-weight: bold">Since variations of case length do not affect the use of this tool, flash hole deburring is most easily performed on brand new brass without trimming.</span>
<span style="font-weight: bold">Since variations of case length do not affect the use of this tool, flash hole deburring is most easily performed on brand new brass without trimming.</span>
Re: Flash hole uniforming/ deburring???
I've got the Sinclair tool pictured above that indexes on the case head. Chucked in a table top drill press it makes short work of the deburring and chamfering (thanks to Doc's tutorial on this board).
I've got the Sinclair tool pictured above that indexes on the case head. Chucked in a table top drill press it makes short work of the deburring and chamfering (thanks to Doc's tutorial on this board).
Re: Flash hole uniforming/ deburring???
http://www.shooters-supply.com/reloading_equipment.html
Flash Hole Deburring tool (see photo)-specify standard or PPC .. $17.95
http://www.shooters-supply.com/reloading_equipment.html
Flash Hole Deburring tool (see photo)-specify standard or PPC .. $17.95
Re: Flash hole uniforming/ deburring???
I use Sinclairs higher grade deburring tool with caliber specific inserts.I think it's a far superior system than the KM style because the shroud that encases the cutter fills up with shavings on the KM.Then of course you gotta dig the damn compressed shavings out or you will have inconsistent depth of cut.
Steve
I use Sinclairs higher grade deburring tool with caliber specific inserts.I think it's a far superior system than the KM style because the shroud that encases the cutter fills up with shavings on the KM.Then of course you gotta dig the damn compressed shavings out or you will have inconsistent depth of cut.
Steve
