Gunsmithing FN SPR Bolt Disassembly

[Westtexan]

What is the easiest way to disassemble the bolt on an FN SPR? I have used "Search" and didnt find anything the subject.

Thanks

 

[mdmp5]

Re: FN SPR Bolt Disassembly

Put the safety on halfway, remove the bolt. Now you can freely unscrew the firing pin out of the bolt. Any further disassembly requires punching out roll pins. It is hard to explain how to remove the claw extractor, but it isn't hard.

 

[Westtexan]

Re: FN SPR Bolt Disassembly

Appreciate the information.. That helped!

 

[19Scout77]

Re: FN SPR Bolt Disassembly

DO NOT LET THE SAFETY MOVE OUT OF THE MIDDLE POSITION!!

 

[Westtexan]

Re: FN SPR Bolt Disassembly

I will remember that... I have heard that if it moves from that position its a bitch to put back together...

 

[mdmp5]

Re: FN SPR Bolt Disassembly

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Westtexan</div><div class="ubbcode-body">I will remember that... I have heard that if it moves from that position its a bitch to put back together...</div></div>

Not a problem at all. You just screw it clockwise with a little bit of muscle and it goes right back on. Done it many times.