Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Is the installation of this bottom metal a do it youself project or does it need to go to a gunsmith. Will I need to have it bedded at the same time? Thanks for the help guys. shane
I chose to have a smith here in houston do it as it requires a little bit of end mill work to be done properly. I am having the smith pillar bed at the same time.
Ditto that Jeff is a top notch guy to deal with. Very friendly, very helpful.
The cost is $175 for pillar bedding, and I have no idea how much it's going to cost for the mill work. According to Jeff, it's a relatively small amount of time on the end mill, so I wouldn't expect it to cost much.
Most of the time the factory front bolt will only engage one thread. I found some bolts at Midway and Brownells. Remember the FN= Winchester which is 1/2-32TPI not 1/4-28 like a Remington or Savage.