Forster dasher sizing

[SleepDoc]

I have a dasher build on order and I am gathering reloading components now. I plan to use forster full length sizing die and have custom honed dies for other calibers that I follow with a mandrel. I plan to do the same method with the dasher and was wondering if anyone knows what the factory forster full length sizer sizes lapua brass down to with the expander ball removed?

 

[ZiaHunter]

I have Forster Dasher FL sizing die with the neck honed to .265. Turn necks to .012 and checked neck tension with a Type S bushing die before deciding which dimension to have the neck honed. Size the brass without the expander and experiencing very little or no runout. (.0005 or less)

 

[Sig Marine]

I have a dasher build on order and I am gathering reloading components now. I plan to use forster full length sizing die and have custom honed dies for other calibers that I follow with a mandrel. I plan to do the same method with the dasher and was wondering if anyone knows what the factory forster full length sizer sizes lapua brass down to with the expander ball removed?

Mine is .258.

 

[Sheldon N]

I had my Forster FL dies honed to .265 as well. Run a carbide expander mandrel die afterward for 0.002 neck tension. No turn necks, very low runout.

 

[SleepDoc]

Mine is .258.

Perfect thats what I was looking for.