Geissele Heavy Barrels. (Update 28OCT24)

[Bigjake83]

Has anyone had any time behind these new heavy profile Geissele barrel??

I just picked one up from Primary Arms with thier Halloween sale. They look to be the same profile as the barrels I custom order. Only thing I would have done differently is 5/8x24 threads and a intermediate gas length.

 

[matt33]

I'm kicking around the idea of ordering one this weekend. If I do, it will be a while before I shoot it, if you get some Trigger Time with one, please post a range report!

 

[Bigjake83]

I'm kicking around the idea of ordering one this weekend. If I do, it will be a while before I shoot it, if you get some Trigger Time with one, please post a range report!

Will do Sir

 

[MSTN]

Geissele Automatics 5.56 CHF Mid-Length Heavy Profile AR-15 Barrel - 14.5”

The Geissele Automatics 14.

www.primaryarms.com

1.2 LB???

That's an ounce lighter than Noveske's 14.5" super-lightweight "Skinny" profile.

CHF Chrome Lined Lo-Pro Gas Block Barrel 5.56 | Noveske Rifleworks

*Our chrome lined barrels are cold hammered forged and made with the material callouts and manufacturing process for the M249 Machine Gun barrel. The cold hammer forging process work hardens the steel around a rifled mandrel, which creates the lands and grooves. The barrel is then chrome lined...

noveske.com

It's ether a typo - or NOT heavy.

I hope it is the latter.

For the record, I have accuracy tested only one Geissele HFCL barrel. I hope they're all this good.

 

[Bigjake83]

Geissele Automatics 5.56 CHF Mid-Length Heavy Profile AR-15 Barrel - 14.5”

The Geissele Automatics 14.

www.primaryarms.com

1.2 LB???

That's an ounce lighter than Noveske's 14.5" super-lightweight "Skinny" profile.

CHF Chrome Lined Lo-Pro Gas Block Barrel 5.56 | Noveske Rifleworks

*Our chrome lined barrels are cold hammered forged and made with the material callouts and manufacturing process for the M249 Machine Gun barrel. The cold hammer forging process work hardens the steel around a rifled mandrel, which creates the lands and grooves. The barrel is then chrome lined...

noveske.com

It's ether a typo - or NOT heavy.

I hope it is the latter.

For the record, I have accuracy tested only one Geissele HFCL barrel. I hope they're all this good.

I spotted that before I ordered, called Geissele and yes it's a typo. Barrel weight is 2.6lbs

 

[MSTN]

That really IS heavy!

 

[Bigjake83]

That really IS heavy!

Once I received the barrel I'll throw it on a scale and actually get a precise weight for it. when I talked to the guys at Geissele apparently these barrels are so new they don't know much about them.

 

[Bigjake83]

2 Lbs 2.6oz

Interesting enough it says that it's an H-Bar but it's definitely not a H-Bar contour.

 

[MSTN]

Superior to the H-BAR contour, IMO.

Looks like the original Noveske SS "artillery" profile from 20+ years ago.

 

[matt33]

2 Lbs 2.6oz

Interesting enough it says that it's an H-Bar but it's definitely not a H-Bar contour.

View attachment 8534027View attachment 8534028View attachment 8534029

That looks like it should hammer. Please let us know the accuracy once you get some trigger time

 

[Bigjake83]

That looks like it should hammer. Please let us know the accuracy once you get some trigger time

Will do, I have a SOLGW Broadsword builder kit inbound.

 

[matt33]

Will do, I have a SOLGW Broadsword builder kit inbound.

I'm bouncing back and forth between that Builder kit, or buying an LMT MRP and sending one of these barrels off to D Wilson for LMT conversion

 

[33jeep]

I just got a 14.5 installed in a broadsword receiver set and it shoots very well. I'm 100ish rnds in and it consistently shoots 1/2-3/4" @ 100 with a 1-8 NX8.

 

[SFree]

I'm bouncing back and forth between that Builder kit, or buying an LMT MRP and sending one of these barrels off to D Wilson for LMT conversion

I would build the SOLGW over the LMT anytime and have had both. Still own the SOLGW…