I'm thinking about selling my G19 & Advance Arms .22cal conversion in hopes of finding a G17L or G34... whats the difference between the 17L and G34 and which do you prefer?
34 is a little shorter(barrel length like 6 vs 5 1/3 inches if memory serves correctly), 34 is a little lighter and in my mind better balanced, prefer the 34 over the 17L though honestly fairly similar
ive shot a 34 before and while its a great gun i just dont see a terribly large advantage over a 17/19 in a rifle match.. if i was shooting IPSC or IDPA that might be a different story
Another option is:
You can get a new stainless steel aftermarket slide/complete upper from Lone Wolf that'll work on the Glock 19 frame. You just need to add a longer dust cover for the longer slide. Glock 17 & 34 mags will stll work but stick out the bottom a little but works well if you prefer the Glock 19 grip size.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hooper</div><div class="ubbcode-body">The G35 and KKM 9mm conversion barrel is hard to beat.
You will end up with both .40 and 9mm calibers. </div></div>
I've been told that it's even sweeter to shoot in 9mm because the conversion barrel is heavier than the barrel on a G34. Been thinking of the combo and maybe even getting a .357 Sig barrel for it, if such a thing exists.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hooper</div><div class="ubbcode-body">The G35 and KKM 9mm conversion barrel is hard to beat.
You will end up with both .40 and 9mm calibers. </div></div>
+1 Its a nice tight heavy barrel, along with the sight radius of the G34/35. You can train with cheaper 9mm, then switch out barrel in 30 seconds and carry your '.40' when leaving the range.
Just keep the ammo and mags in 2 separate containers...
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hooper</div><div class="ubbcode-body">The G35 and KKM 9mm conversion barrel is hard to beat.
You will end up with both .40 and 9mm calibers. </div></div>
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Storm Tactical</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hooper</div><div class="ubbcode-body">The G35 and KKM 9mm conversion barrel is hard to beat.
You will end up with both .40 and 9mm calibers. </div></div>
+1 Its a nice tight heavy barrel, along with the sight radius of the G34/35. You can train with cheaper 9mm, then switch out barrel in 30 seconds and carry your '.40' when leaving the range.
Just keep the ammo and mags in 2 separate containers... </div></div>
How does this work with the larger breech face of 40 cal.
I have a 19, and a 35. I have the lone wolf 9mm conversion barrel in the 35. It is accurate, and functions well however with light reloads I have ejection problems. Its easy to put the 9mm ejector in so I'm going to try that. As far as the 19 I find the grip frame to be to small for my hands.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dmg308</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Storm Tactical</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Hooper</div><div class="ubbcode-body">The G35 and KKM 9mm conversion barrel is hard to beat.
You will end up with both .40 and 9mm calibers. </div></div>
+1 Its a nice tight heavy barrel, along with the sight radius of the G34/35. You can train with cheaper 9mm, then switch out barrel in 30 seconds and carry your '.40' when leaving the range.
Just keep the ammo and mags in 2 separate containers... </div></div>
How does this work with the larger breech face of 40 cal. </div></div>
The barrel is basically a 9mm with a .40 breech face. Even the ejector gets t stay as I have never seen one that did not work with the .40 ejector. But if it had some issues all that is needed is a 9mm trigger assembly.