H1000 in the 7mm RSAUM

[mpwolf]

Just a thought, but has anyone tried H1000 in the 7 Rsaum with 162 gr bullets? I'm guessing that velocity might suffer a bit, but load density would be good, and temps/pressures might be help with barrel/throat longevity, much like in the 6.5 4S... Then again, if I cook this tube, I can rebarrel with a 6.5 4S, and life will be good!

 

[mpwolf]

found it in the forum below- carry on

 

[Assault116]

Running the same bullet and H1000 in a 7/300 WSM and it's running them at about 3050 fps, good accuracy and single digit SD's. Works well for me so I'm sure it'd work well in the 7Saum too.

 

[Skyking]

Just a thought, but has anyone tried H1000 in the 7 Rsaum with 162 gr bullets? I'm guessing that velocity might suffer a bit, but load density would be good, and temps/pressures might be help with barrel/throat longevity, much like in the 6.5 4S... Then again, if I cook this tube, I can rebarrel with a 6.5 4S, and life will be good!

I got less pressure with Retumbo 65.3 Berger 168 vld's 3150fps

http://www.snipershide.com/shooting...rn-7saum-thunderbeast-30p-1-video-update.html

 

[R. Chapman]

I would think H1000 would be on the slow side but hell, if it works, it works. :thumbsup: