My rifle is finished. New cartridge, no data at all. Initial plans are for subsonic only but it could go faster if desired. Going to try Trailboss but I don't know if I have the case volume to reach my target of 1060 fps. 100% fill is 17.4 grains. Have the first round loaded with 14.0 grains so I have a little room to slowly increase as I get real velocity data. If I can get Trailboss to speed I plan to stay with it for the fill factor.
It would be greatly appreciated if I could provide someone with the information needed to make a Quickload calc on the estimated velocity attainable with Trailboss. If it isn't expected to get to around 1060 then if there is another viable powder to look at. I have run numbers in the Gordon Reloading Tool and it calc'd viable loads for both Vihtavuori N-340 and Unique. I have never used N-340 and Unique doesn't sound right with the bullet weight. Trailboss powder data has yet to be included in the Gordon database.
Can someone out there help me out?
Thank you,
MrSmith
It would be greatly appreciated if I could provide someone with the information needed to make a Quickload calc on the estimated velocity attainable with Trailboss. If it isn't expected to get to around 1060 then if there is another viable powder to look at. I have run numbers in the Gordon Reloading Tool and it calc'd viable loads for both Vihtavuori N-340 and Unique. I have never used N-340 and Unique doesn't sound right with the bullet weight. Trailboss powder data has yet to be included in the Gordon database.
Can someone out there help me out?
Thank you,
MrSmith