Hawk Hill load development

[LC 6.5 Shooter]

I just received my Barreled action from patriot valley arms. Hawk Hill 26” 6.5CM on curtis axiom and MPA chassis.

I have 140elds, H4350 and Rl16, lapua and Hornady brass, br4 and cci450 primers.

Any experience loading the components for a HH barrel.

Also anything out there that just shot ridiculous good.

I ssarched the tolic but did t find anything. Thx for the help.

 

[Kadams1563]

140 eld
41.9-42.3 of H4350
2.200 or so CBTO
Lapua brass

Velocity from 2750-2830 or so is what your looking for.

Your welcome.

 

[b6graham]

look in the depot. find a common load. subtract 10% and work up

no one can tell you where to start or where your node is gonna be

 

[Supersubes]

The hawk hill is a 4 groove cut rifled barrel like a Krieger, Bartlein, or Brux. It has no special requirements. Work the load like you would with any other rifle.

 

[LC 6.5 Shooter]

140 eld
41.9-42.3 of H4350
2.200 or so CBTO
Lapua brass

Velocity from 2750-2830 or so is what your looking for.

Your welcome.

What size comparator was used to get 2.20” CBTO. .25?

 

[Supersubes]

What size comparator was used to get 2.20” CBTO. .25?

That’s almost exactly what mine is using a 6.5 comparator for my saami creedmoor chamber. Mine is 2.197.

Edit: 2.197 is touching with the 140 eld. I jump them .020.

 

[LC 6.5 Shooter]

That’s almost exactly what mine is using a 6.5 comparator for my saami creedmoor chamber. Mine is 2.197.

Edit: with the 140 eld.

Any idea what kind of jump that is?

 

[Supersubes]

See my edit in the same post.