Rifle Scopes Hensoldt ZF LT Manual

[Willoughby1971]

Anyone have a manual for a Hensoldt ZF 4-16x56 LT? I need pictures of the section with turret/zero stop instructions.

There is a manual in the Resources section but it is for the older no locking turret model.

Thanks,
Willoughby

 

[Mordamer]

It is super simple. You loosen the top screw a couple turns, rotate the turrets to zero, and tight back the top screw. Done. What are you having trouble with? I have one of these scopes but no manual.

 

[Willoughby1971]

You have to rotate the top cover to a certain position or the zero stop doesn’t stop on zero and you don’t have the full adjustment range.

 

[Mordamer]

You have to rotate the top cover to a certain position or the zero stop doesn’t stop on zero and you don’t have the full adjustment range.

I gotcha. The max you can get is 14.6 mils on my scope with the zero stop set exactly at zero. When the turrets is set to zero and locked in the down position you rotate the top flat plate clockwise until it stops. Then tighten the top screw. This sets the zero stop at zero and gives you the max elevation possible.

 

[Willoughby1971]

I gotcha. The max you can get is 14.6 mils on my scope with the zero stop set exactly at zero. When the turrets is set to zero and locked in the down position you rotate the top flat plate clockwise until it stops. Then tighten the top screw. This sets the zero stop at zero and gives you the max elevation possible.

Got it, thank you