I pulled the trigger on one of these so now I'm wondering if someone can tell me the best place to get 34mm rings for it. Also any idea what hight I need, I have a 700 LTR in an AI chassis.
Rifle Scopes Horus/Bushnell HDMR
- Thread starter redrum007
- Start date
Re: Horus/Bushnell HDMR
Im sure you can get rings from any of the hide vendors or you can go into your local Sportsman's if you have one and they should have some. Do you have a 20 moa base on your rifle? I would say low rings to med.
Im sure you can get rings from any of the hide vendors or you can go into your local Sportsman's if you have one and they should have some. Do you have a 20 moa base on your rifle? I would say low rings to med.
Re: Horus/Bushnell HDMR
It depends a little on the base you're using, but in most cases the low 34mm Seekins should work just fine.
It depends a little on the base you're using, but in most cases the low 34mm Seekins should work just fine.
Re: Horus/Bushnell HDMR
I am running the ADM Recon SL mounts for mine, I have them on bolt guns, they are about the same height at medium rings
I am running the ADM Recon SL mounts for mine, I have them on bolt guns, they are about the same height at medium rings
Re: Horus/Bushnell HDMR
There was a guy selling 34mm badger medium's i think in the for sale section. I'm pretty sure those would work - not sure if you can get away with lows? depends on your base i guess. I'm running badger mediums on my AICS Rem 300 winmag with a 20 moa egw base and have a scope with a 30mm tube and 50 obj and i have about <span style="text-decoration: line-through">3mm +- 1mm</span> edit: 2.3 cm clearance between obj and barrel.
There was a guy selling 34mm badger medium's i think in the for sale section. I'm pretty sure those would work - not sure if you can get away with lows? depends on your base i guess. I'm running badger mediums on my AICS Rem 300 winmag with a 20 moa egw base and have a scope with a 30mm tube and 50 obj and i have about <span style="text-decoration: line-through">3mm +- 1mm</span> edit: 2.3 cm clearance between obj and barrel.
Re: Horus/Bushnell HDMR
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TCB</div><div class="ubbcode-body">right now I'm running a standard one piece base </div></div>
Is it a 0 moa base? My friend is running the same scope and has Seekin lows with a 0 MOA base. He has about 3-4mm of clearance from the objective bell to the barrel. he also has about 14.6 Mils of Elevation Adjustment from a 100 yd zero.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TCB</div><div class="ubbcode-body">right now I'm running a standard one piece base </div></div>
Is it a 0 moa base? My friend is running the same scope and has Seekin lows with a 0 MOA base. He has about 3-4mm of clearance from the objective bell to the barrel. he also has about 14.6 Mils of Elevation Adjustment from a 100 yd zero.
