Rifle Scopes Horus H58 info?

Bloodstriker

Sergeant
Full Member
Minuteman
Feb 10, 2013
172
1
I'm trying to find the the subtension information for the H58. Namely, I want to know how thick the lines are compared to the P4F.

Does anyone have any experience with both or know where to find this info?

I can't seem to find it on the S&B or Horus sites.
 

Bloodstriker

Sergeant
Full Member
Minuteman
Feb 10, 2013
172
1
Thanks but I'm looking specifically for the thickness. I'm trying to decide which reticle and I'm leaning towards the horus but I need to make sure that its not too thick.
 

Jerry R

Gunny Sergeant
Full Member
Minuteman
Sep 1, 2006
558
35
Virginia
The main stadia of an H58 in a 5-25x56 PM II is .05 MRAD or 5mm and the P4F is .035 MRAD or 3.5 mm.
 

Bloodstriker

Sergeant
Full Member
Minuteman
Feb 10, 2013
172
1
The main stadia of an H58 in a 5-25x56 PM II is .05 MRAD or 5mm and the P4F is .035 MRAD or 3.5 mm.

Thanks. Exactly what I'm looking for. Where did you find this info? I've been looking for it all night!

EDIT: Sorry, was using Tapatalk at first and didn't realize you're from S&B. Thank you again.
 
Last edited:

Bloodstriker

Sergeant
Full Member
Minuteman
Feb 10, 2013
172
1
The main stadia of an H58 in a 5-25x56 PM II is .05 MRAD or 5mm and the P4F is .035 MRAD or 3.5 mm.

Hi Jerry,

Would you happen to have the specs for the entire reticle? Specifically, I'm looking to see if what the size of the dots are.
 

Jerry R

Gunny Sergeant
Full Member
Minuteman
Sep 1, 2006
558
35
Virginia
Correction, the main stadia is .055 mil. So it's 5.5 mm and not 5 mm as stated above.
Dots are .04 mil, lower horizontal stadia for wind holds are .039 mil. The vertical hash marks on those lines are .028 mil and the smaller .2 mil marks measure .014 mil.

Hope this helps.