How to reduce length of pull on MPA chassis

[harry_x1]

Hi all,

the length of pull on my custom bolt action made on MPA chassis is too long. Is it possible to reduce the length of pull further that what I currently have in the picture? Maybe a different pad which someone sells ?

thanks for your time and attention.

best
Harjeet

 

[Baron23]

Hi all,

the length of pull on my custom bolt action made on MPA chassis is too long. Is it possible to reduce the length of pull further that what I currently have in the picture? Maybe a different pad which someone sells ?

thanks for your time and attention.

best
Harjeet

Look at kick-eeze and pachmayr pads. They have thin ones.

you will most likely have to have a gun/stock smith grind it to fit as is done on pretty much all regular stocks. No big deal.

Also, have you asked MPA if they have thinner pads available that are already the correct outline?

 

[justwoody1]

The Short LOP will reduce your lop by 3/4".
You will have to remove some plastic on the inside of the bag rider to make it go all the way in.
https://masterpiecearms.com/shop/short-lop-recoil-plate-assy/

 

[CavReconScout]

This has the MPA short length of pull kit on it. If I recall correctly it is 12.5-12.75” LOP.

 

[Carole Baskins]

You might try this. I have one on order for my daughter but I'll likely get one too. I'm in the same boat as you are.

Short Length of Pull Buttstock - MasterPiece Arms, Inc.

Lead Time will be 8-10 Weeks from Order date This new Short Length of Pull (LOP) Buttstock can be added to any existing BA Lite, Hybrid, BA, BA Comp or ESR chassis when the LOP requirements are shorter than the standard 13.5″. This will work only with short action calibers. Will not work with […]

masterpiecearms.com

 

[justwoody1]

You might try this. I have one on order for my daughter but I'll likely get one too. I'm in the same boat as you are.

Short Length of Pull Buttstock - MasterPiece Arms, Inc.

Lead Time will be 8-10 Weeks from Order date This new Short Length of Pull (LOP) Buttstock can be added to any existing BA Lite, Hybrid, BA, BA Comp or ESR chassis when the LOP requirements are shorter than the standard 13.5″. This will work only with short action calibers. Will not work with […]

masterpiecearms.com

That won't work. He his a side folding stock. The side folding hinge will make it a standard LOP.

 

[Carole Baskins]

That won't work. He his a side folding stock. The side folding hinge will make it a standard LOP.

You are right. I’m retarded. Thanks for setting me straight

 

[OliverH]

I have the opposite problem on a Hybrid Chassis, I need to lengthen the LOP. Is there any way to get longer pins that anyone knows about and swap them for the standard length ones?