Photos Impossible
- Thread starter TrooperBrian
- Start date
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Adician</div><div class="ubbcode-body">I call propped up. Epoxy!
</div></div>
Nope!
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Adician</div><div class="ubbcode-body">I call propped up. Epoxy!
Nope!
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cm92</div><div class="ubbcode-body">photo shop? magnets?</div></div>
Nope. Nope.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: cm92</div><div class="ubbcode-body">photo shop? magnets?</div></div>
Nope. Nope.
Re: Impossible
took the bullet out removed all the powder and the removed most of the lead from the bullet only leaving a little in the tip?
took the bullet out removed all the powder and the removed most of the lead from the bullet only leaving a little in the tip?
Re: Impossible
Normal loaded round, even if just the bullet had mass, it is too topheavy to stay.
Not on a mirror, you would not see the bottom of the round.
I would not dent, glue, tape or otherwise modify my nice wood desk surface.
Normal loaded round, even if just the bullet had mass, it is too topheavy to stay.
Not on a mirror, you would not see the bottom of the round.
I would not dent, glue, tape or otherwise modify my nice wood desk surface.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rrflyer</div><div class="ubbcode-body">used a fast shutter speed and snapped a picture right before it fell over</div></div>
Nope, stood there just fine.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: rrflyer</div><div class="ubbcode-body">used a fast shutter speed and snapped a picture right before it fell over</div></div>
Nope, stood there just fine.
Re: Impossible
This reminds me of the balancing an egg on one of the solstice's. Definitely a conversation starter.
This reminds me of the balancing an egg on one of the solstice's. Definitely a conversation starter.
Re: Impossible
Shadow looks photoshopped, a good PS user could put this together in about 15mins or less.
Shadow looks photoshopped, a good PS user could put this together in about 15mins or less.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DELTANATE</div><div class="ubbcode-body">I see the Force is strong with this one.</div></div>
I've been made.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DELTANATE</div><div class="ubbcode-body">I see the Force is strong with this one.</div></div>
I've been made.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry. </div></div>
Not with a fast shutter speed.
What duration of time did it remain in this position?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry. </div></div>
Not with a fast shutter speed.
What duration of time did it remain in this position?
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: modifier</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry. </div></div>
Not with a fast shutter speed.
What duration of time did it remain in this position?</div></div>
A very extended period.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: modifier</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: MER0828</div><div class="ubbcode-body">Its spinning like a top?</div></div>
The headstamp would be blurry. </div></div>
Not with a fast shutter speed.
What duration of time did it remain in this position?</div></div>
A very extended period.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DELTANATE</div><div class="ubbcode-body">I see the Force is strong with this one.</div></div>
I've been made. </div></div>
Remember, a Jedi's strength flows from the Force. But beware. Anger, fear, aggression. The dark side are they. Once you start down the dark path, forever will it dominate your destiny.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TrooperBrian</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DELTANATE</div><div class="ubbcode-body">I see the Force is strong with this one.</div></div>
I've been made. </div></div>
Remember, a Jedi's strength flows from the Force. But beware. Anger, fear, aggression. The dark side are they. Once you start down the dark path, forever will it dominate your destiny.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Gaffer</div><div class="ubbcode-body">Truncated bullet?</div></div>
Regular full metal jacket round nose.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Gaffer</div><div class="ubbcode-body">Truncated bullet?</div></div>
Regular full metal jacket round nose.
Re: Impossible
Since there was no response to the Photoshop comment, I'll take another guess.
Superglue the backside of the round to the end of something like a steel gauge block or even another small pistol round. A 32 ACP would be fine.
Neither would show up in the picture and it can "stand" there all day long.
Since there was no response to the Photoshop comment, I'll take another guess.
Superglue the backside of the round to the end of something like a steel gauge block or even another small pistol round. A 32 ACP would be fine.
Neither would show up in the picture and it can "stand" there all day long.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">Since there was no response to the Photoshop comment, I'll take another guess.
Superglue the backside of the round to the end of something like a steel gauge block or even another small pistol round. A 32 ACP would be fine.
Neither would show up in the picture and it can "stand" there all day long.</div></div>
No PS, no other round, no glue, no steel.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">Since there was no response to the Photoshop comment, I'll take another guess.
Superglue the backside of the round to the end of something like a steel gauge block or even another small pistol round. A 32 ACP would be fine.
Neither would show up in the picture and it can "stand" there all day long.</div></div>
No PS, no other round, no glue, no steel.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: longdog</div><div class="ubbcode-body">then how in heck did you do it?!?!?! or are you just thet good. LOL!!</div></div>
Maybe the latter. I'm modest.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: longdog</div><div class="ubbcode-body">then how in heck did you do it?!?!?! or are you just thet good. LOL!!</div></div>
Maybe the latter. I'm modest.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: t4x7trc</div><div class="ubbcode-body">ok so how did you do it?
I see a 9mm luger round standing on its nose, very well "ballanced" on that nose. nice desk top by the way!</div></div>
Did you notice the title?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: t4x7trc</div><div class="ubbcode-body">ok so how did you do it?
I see a 9mm luger round standing on its nose, very well "ballanced" on that nose. nice desk top by the way!</div></div>
Did you notice the title?
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triggerhappy</div><div class="ubbcode-body">vacuum suction above it?</div></div>
What?
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triggerhappy</div><div class="ubbcode-body">vacuum suction above it?</div></div>
What?
Re: Impossible
Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical.
Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 270grdeerround</div><div class="ubbcode-body">Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical. </div></div>
yes
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 270grdeerround</div><div class="ubbcode-body">Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical. </div></div>
yes
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triggerhappy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 270grdeerround</div><div class="ubbcode-body">Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical. </div></div>
yes</div></div>
Unless I own some kind of industrial vacuum pump, there is no way to generate that kind of suction without seeing it in the picture or sucking up the round entirely.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Triggerhappy</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: 270grdeerround</div><div class="ubbcode-body">Use something like a vacuum cleaner just far enough above the round that it can't quite pick it up but it can keep it vertical. </div></div>
yes</div></div>
Unless I own some kind of industrial vacuum pump, there is no way to generate that kind of suction without seeing it in the picture or sucking up the round entirely.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: digshootn</div><div class="ubbcode-body">A Kirby vac might do it...</div></div>
But..I can't afford one of those.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: digshootn</div><div class="ubbcode-body">A Kirby vac might do it...</div></div>
But..I can't afford one of those.
Re: Impossible
I know, you put the round in front of your computer and you just keep the Axeman's signature on the screen in front of it and the round just doesn't move. Kinda like my scrolling once I get to one of his posts.
I know, you put the round in front of your computer and you just keep the Axeman's signature on the screen in front of it and the round just doesn't move. Kinda like my scrolling once I get to one of his posts.
Re: Impossible
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The338LM</div><div class="ubbcode-body">This took me about 5 tries. Its not that hard.
![url]](http://[url="http://i607.photobucket.com/albums/tt153/ainnamor21/DSC_0025.jpg"]http://i607.photobucket.com/albums/tt153/ainnamor21/DSC_0025.jpg[/url])
</div></div>
That is a woodgrain bench. Do it on a flat surface, like a kitchen counter, a desk, marble floor..
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The338LM</div><div class="ubbcode-body">This took me about 5 tries. Its not that hard.
</div></div>
That is a woodgrain bench. Do it on a flat surface, like a kitchen counter, a desk, marble floor..
![url]](http://[url="http://i607.photobucket.com/albums/tt153/ainnamor21/DSC_0027.jpg"]http://i607.photobucket.com/albums/tt153/ainnamor21/DSC_0027.jpg[/url])
Similar threads
