so i can't seem to find an inexpensive torque wrench that measures inch pounds around me. i can of course find one in foot pounds. what is the conversion of inch pounds to foot pounds? thanks.
Gunsmithing Inch Pounds to Foot Pounds
- Thread starter base
- Start date
Re: Inch Pounds to Foot Pounds
It is much easier than it seems.
There are 12 inch pounds in 1 foot pound.
If you want the other way around...
There are .083 foot pounds in 1 inch pound.
It is much easier than it seems.
There are 12 inch pounds in 1 foot pound.
If you want the other way around...
There are .083 foot pounds in 1 inch pound.
Re: Inch Pounds to Foot Pounds
http://www.unitconversion.org/energy/inch-pounds-to-foot-pounds-conversion.html
Google can be your friend too
http://www.unitconversion.org/energy/inch-pounds-to-foot-pounds-conversion.html
Google can be your friend too
Re: Inch Pounds to Foot Pounds
What is the torque rate you're wanting to apply? For large inch-lb values it's easy to get accurate torque from a ft-lb wrench, but typically when inch-lb's are called for it's because the value is too small to do with ft-lb's. For example, if 60 in-lb is the torque called for, that's only 5 ft-lb, which is less than most ft-lb wrenches will adjust down to.
-matt
What is the torque rate you're wanting to apply? For large inch-lb values it's easy to get accurate torque from a ft-lb wrench, but typically when inch-lb's are called for it's because the value is too small to do with ft-lb's. For example, if 60 in-lb is the torque called for, that's only 5 ft-lb, which is less than most ft-lb wrenches will adjust down to.
-matt
Re: Inch Pounds to Foot Pounds
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: monteboy84</div><div class="ubbcode-body">What is the torque rate you're wanting to apply? For large inch-lb values it's easy to get accurate torque from a ft-lb wrench, but typically when inch-lb's are called for it's because the value is too small to do with ft-lb's. For example, if 60 in-lb is the torque called for, that's only 5 ft-lb, which is less than most ft-lb wrenches will adjust down to.
-matt </div></div>
+1 on Matt's comments! While you may be able to find a cheap craftsman or other ft/lb torque wrench locally, unless you can find one that accurately adjusts down to 1.5 ft/lbs to say 6 ft/lbs, you might as well not even bother.
Use the proper tool for the job you need done!
As for an "inexpensive" torque wrench in in/lbs, what is your budget range and maybe I/we can assist you in finding a suitable wrnech in your price range that you can order and have shipped to your door. I had to do the same thing since my "local" sources were trying to sell garbage that either wouldn't work for me or was of such low quality I didn't want to waste the money.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: monteboy84</div><div class="ubbcode-body">What is the torque rate you're wanting to apply? For large inch-lb values it's easy to get accurate torque from a ft-lb wrench, but typically when inch-lb's are called for it's because the value is too small to do with ft-lb's. For example, if 60 in-lb is the torque called for, that's only 5 ft-lb, which is less than most ft-lb wrenches will adjust down to.
-matt </div></div>
+1 on Matt's comments! While you may be able to find a cheap craftsman or other ft/lb torque wrench locally, unless you can find one that accurately adjusts down to 1.5 ft/lbs to say 6 ft/lbs, you might as well not even bother.
Use the proper tool for the job you need done!
As for an "inexpensive" torque wrench in in/lbs, what is your budget range and maybe I/we can assist you in finding a suitable wrnech in your price range that you can order and have shipped to your door. I had to do the same thing since my "local" sources were trying to sell garbage that either wouldn't work for me or was of such low quality I didn't want to waste the money.
Re: Inch Pounds to Foot Pounds
i really only need the wrench to mount my scope and stock to the action. the scope needs 50 inch pounds. don't know of anyone around me that has one for me to use. i know Midway sells the Fat Wrench for about $45 but like i said once i mount these 2 things up i'm good to go.
i really only need the wrench to mount my scope and stock to the action. the scope needs 50 inch pounds. don't know of anyone around me that has one for me to use. i know Midway sells the Fat Wrench for about $45 but like i said once i mount these 2 things up i'm good to go.
Re: Inch Pounds to Foot Pounds
I have a Fat Wrench from Midway and I find it very useful. I use it to make sure everything is always torqued down correctly. I don't regret spending the money on it one bit, even though I am on a pretty tight budget. But if you don't want to buy a wrench then maybe you could go to a gunsmith and see if they will torque everything down accurately and correctly.
I have a Fat Wrench from Midway and I find it very useful. I use it to make sure everything is always torqued down correctly. I don't regret spending the money on it one bit, even though I am on a pretty tight budget. But if you don't want to buy a wrench then maybe you could go to a gunsmith and see if they will torque everything down accurately and correctly.
Re: Inch Pounds to Foot Pounds
I would buy an inch pound torque wrench, you'd be surprised how much you use it the deeper you get in the sport of shooting
I would buy an inch pound torque wrench, you'd be surprised how much you use it the deeper you get in the sport of shooting
Re: Inch Pounds to Foot Pounds
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vegas</div><div class="ubbcode-body">...but like i said once i mount these 2 things up i'm good to go. </div></div>
Sorry...but this logic is just FLAWED!
What happens when you need to remove/reinstall your scope (either back onto the rifle's scope base or to remove/reinstall the scope into its rings) or remove/reinstall your barreled action from the stock? Go back to borrowing a wrench from someone? Go through this same search/quest again?
Just get it in your head that you will ALWAYS need a quality, reliable and repeatable torque wrench for any precision rifle application (and many, MANY other applications) now and in the future. Buy once, cry once.
You can get the Wheeler unit for <$45 + S&H (maybe slightly less if you use a discount code from MidwayUSA). There is also the Borka torque from Scott at Liberty Optics or Steve at Triad Tactical (or other Hide sponsoring vendors) which is an excellent, adjustble option for properly torquing down those items like scope ring cap screws, ring-to-base screws, action screws, etc. They run around $95.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: vegas</div><div class="ubbcode-body">...but like i said once i mount these 2 things up i'm good to go. </div></div>
Sorry...but this logic is just FLAWED!
What happens when you need to remove/reinstall your scope (either back onto the rifle's scope base or to remove/reinstall the scope into its rings) or remove/reinstall your barreled action from the stock? Go back to borrowing a wrench from someone? Go through this same search/quest again?
Just get it in your head that you will ALWAYS need a quality, reliable and repeatable torque wrench for any precision rifle application (and many, MANY other applications) now and in the future. Buy once, cry once.
You can get the Wheeler unit for <$45 + S&H (maybe slightly less if you use a discount code from MidwayUSA). There is also the Borka torque from Scott at Liberty Optics or Steve at Triad Tactical (or other Hide sponsoring vendors) which is an excellent, adjustble option for properly torquing down those items like scope ring cap screws, ring-to-base screws, action screws, etc. They run around $95.
Re: Inch Pounds to Foot Pounds
50 in-lbs for a scope mount or rings sounds a tad high. From what I've seen, 10-20 in-pounds is typical for rings, and 15-25 for bases. Having done without a torque wrench for a long time before I finally bought one, I found that I was consistently over-torquing (to the point of visibly skewing the reticle on one scope). The Borka is a cool little tool.
50 in-lbs for a scope mount or rings sounds a tad high. From what I've seen, 10-20 in-pounds is typical for rings, and 15-25 for bases. Having done without a torque wrench for a long time before I finally bought one, I found that I was consistently over-torquing (to the point of visibly skewing the reticle on one scope). The Borka is a cool little tool.
Re: Inch Pounds to Foot Pounds
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flyrodder</div><div class="ubbcode-body">50 in-lbs for a scope mount or rings sounds a tad high. From what I've seen, 10-20 in-pounds is typical for rings, and 15-25 for bases. Having done without a torque wrench for a long time before I finally bought one, I found that I was consistently over-torquing (to the point of visibly skewing the reticle on one scope). The Borka is a cool little tool. </div></div>
I think he's referring to rings to rail. 50-65in lbs is common.
<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: flyrodder</div><div class="ubbcode-body">50 in-lbs for a scope mount or rings sounds a tad high. From what I've seen, 10-20 in-pounds is typical for rings, and 15-25 for bases. Having done without a torque wrench for a long time before I finally bought one, I found that I was consistently over-torquing (to the point of visibly skewing the reticle on one scope). The Borka is a cool little tool. </div></div>
I think he's referring to rings to rail. 50-65in lbs is common.
Similar threads
